We will see. I think this old Gel cell is toast. But I wanted a charger for AGM (absorbed glass mat) so I got this one. You can check it out on amazon at the link below.
It is a Schumacher SSC-1500A-CA Ship ‘N’ Shore 15 Amp SpeedCharge Charger with Battery Clamps.
In this video we’re going to walk you through programming our battery guards. Discharging your battery to low levels can cause irreversible damage, reducing its performance and charge-holding ability. Battery guards prevent discharging your battery to very low levels by disconnecting the battery in an under-voltage situation. They also disconnect the battery in an over-voltage situation, so protecting sensitive electronic appliances from damage resulting from faulty alternators or chargers.
Once the battery guard senses a charging voltage on the battery it will reconnect, allowing you to continue to use your 12V/24V systems.
Battery Guards: https://www.12voltplanet.co.uk/battery-guards.html
Hello, In this video we explain the differences between Voltage Sensitive Relay VSR’s and Battery-to-Battery chargers.
12 Volt Planet is an online supplier of low voltage electrical components and accessories for the auto, marine and leisure after-markets.
If you have any questions then please leave a comment.
Voltage Sensitive Relay (VSR’s): http://www.12voltplanet.co.uk/voltage-sensitive-relay-12v-140a.html
Battery-To-Battery Chargers: http://www.12voltplanet.co.uk/battery-to-battery-chargers.html
Knowledge Centre: http://www.12voltplanet.co.uk/knowledge-centre.html
In this short video I demonstrate how to connect a battery charger. The important thing here is to ensure you are connecting it up to the right terminal. If you get this wrong you could damage the battery and the charger. Enjoy 🙂
Battery charger specification
MAYPOLE MP7423 INTELLEGENT BATTERY CHARGER 6V/12V 4A
•Suitable for use with 6V & 12V lead-acid and 12V AGM batteries of 1.2Ah to 120Ah.
•Input : 230V AC 50Hz 0.6A
•Outputs: 6V: 4A DC 12V:4A DC
•Automatic detection of battery voltage & condition
•Automatic charging current selection
•4 charging modes : 12V Standard, AGM & Winter; 6V Standard
•5 step charging including recovery & maintenance cycles
•Memory function automatically re-starts charging if interrupted
•LCD display with battery level indicator & dual colour backlight
•Interchangeable 1.5m battery clip & ring terminal connector leads included
•Overload, reverse-polarity and short circuit protection
•Manufactured to European electrical safety standards
•Suitable for low maintenance and maintenance-free batteries
•Not recommended for use with GEL batteries
This tutorial shows you how to turn your old computer power supply in to a power supply that can provide enough power for your Turnigy charger or any battery charger that accepts a 12 volt input and requires less than about 10 amps. Please be careful when working with these power supplies – if the leads are allowed to short while the power is turned on, you will burn yourself and possibly start a fire. I accept no responsibly for your actions so be careful!
I cant believe it hoodwinked me into buying a new battery. the worst part is,they require your old battery as a trade in or they charge you a $12.00 fee. so my old battery ,that wasnt bad, is forever gone. what a waste. this is the first time ive used this battery charger. its also about a year old and i dont have the box or the receipt. my bad. i m out 50 bucks for a battery and 150 bucks for a battery charger.
If you’re shopping on amazon, it helps me if you use my link here:
Go here to get an incredible discount on an all American sun oven
Visit this link here for preparedness related needs.
How To Charge Multiple Car Batteries w/ EXO’s XS Power Battery Charger & DUAL Copper Bus Bar Install
User Request: This Is How Charge My Batteries
Thanks For Rating & Subscribing!
Subwoofer Demo Coming Up!