iMars™ 12V 6A Pulse Repair LCD Battery Charger For Car Motorcycle Lead Acid Battery Agm Gel Wet

【Flash Deal- Get in fast!】:
【Battery charger】:

【Cool Electric Equipments】:
【Check More Cheap Tools 】:
【Shop With Your Points】:
【Down Banggood app】:

iMars™ 12V 6A Pulse Repair LCD Battery Charger For Car Motorcycle Lead Acid Battery Agm Gel Wet
Microprocessor Control (CPU).
2. This is a fully automatic battery charger with 3 charge stages.
3. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.
4. 3-stage chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.
5. Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..

Switchmode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over voltage protection: Yes
Over temperature protection: Yes
Cooling: Fan

Input voltage: 100-240V AC, 50-60Hz
Rated output: 12V DC, 5-6A Max.
Minimum start voltage: 8.0V
Battery range: 4-100Ah
Thermal protect: 65’C+/-5’C
Efficiency: App. 85%.
Compliant standards: CB,CE, IEC60335, EN61000, EN55014
Dimension (L×W×H): 150×85×60mm

This Charger is for battery capacity between 4AH to 100AH
Pls check the capacity (AH) of your battery before buying the charger! Thanks!

Package Included:
1 X iMars™ 12V 6A Pulse Repair LCD Battery Charger For Car Motorcycle Lead Acid Battery Agm Gel Wet
Banggood- the best bang for your buck!
Subscribe for all our latest 3C product, RC quads, helis and boats, household
and LED products, Exclusive coupon and giveaways. We’ve got what you’re looking for.

☞European warehouse:
☞USA Warehouse:


Portable Charger 32000 RAVPower 32000mAh Battery Pack 6A Output, USB Power Banks for iP…

Get it Here –

11 Days of Power: Gigantic 32000mAh capacity charges an iPhone X 7.1 times, Galaxy S8 for 6.4 times, iPad mini 4.3 times, or an iPad Pro for 1.8 times. Note:1,If you plan to bring an airplane, it is recommended to contact the airline first. 2,Please use the original 8Pin/ 30Pin Cable (Not included in the package) by Apple to charge Apple products 60% Faster Recharge: Halve charging time by using a DC 5V/2A or DC 5V/2.4A AC charger 3 iSmart 2.0 USB Ports: Charge up to 3 devices simultaneously with a total current output of 6A (2.4A max per port); note: portable charger does not support Qualcomm Quick Charge Premium, Tested Quality: High-density Li-polymer cells are protected by a UL94 V-0 fire and UV resistant casing; power bank features overcharge, over-discharge, and short circuit protections What You Get: Lifetime Warranty, RAVPower Ace Series 32000mAh Portable Charger, 2 x Micro USB Charging Cables, Carry Pouch, User Guide

Get it Here –
portable charger 32000 ravpower,portable charger 32000mah,portable charger 32000,portable charger 32000 ravpower 32000mah,ace 32000 portable charger,32000mah portable charger,


12V 6A LCD Smart Fast Car Battery Charger for car Motorcycle + repair

Don’t forget to SMACK that LIKE button and SUBSCRIBE for more!

Click “Subscribe” to stay updated. It’s free!! Also, feel free to check us out on Facebook, Twitter, and Instagram at our addresses below!

Check us out on
Our Channel:


Commercial inquiries:

online store:


NITECORE V2 Speedy In-Car Battery Charger with 6A Output Sneak Peek Video from Shot Show 2018

NITECORE’s V2 In-car Speedy Battery Charger provides users with a powerful and portable charging solution for daily use and traveling. This two-channel battery charger provides a rapid combined charging current rate up to 6A or 3A per slot, allowing users the ability quickly recharge batteries on the go.




SCA Automatic Car Battery Charger Teardown (12V 6A)

A quick teardown of an automatic car battery charger to see how it’s built and the quality of its components.

Original review video:

Product page:

Patreon link:


SCA Automatic Car Battery Charger Review (12V 6A)

*This is an unpaid, non-sponsored review*

In this video I review an automatic car battery charger and measure how affective it’s 7 stage charge cycle is but monitoring it’s voltage and current.

Teardown video:

Product page:

Patreon link:


Cat 5, 5E, 6, and 6A Cables – Distance and Speed Limitations

A simplified summary of the specs for the most common categories in use today can help you determine what is right for you.


Category 5-100 mbps-100 meters (328 feet)

Category 5e-1 Gigabit/sec-100 meters (328 feet)

Category 6- 3 Gigabit/sec-100 meters (328 feet)

Category 6A- 10 Gigabit/sec-100 meters (328 feet)

If you have very short runs, you may be able to use the cable at a lower rating than officially required. For example, on a 10 Gigabit application it is usually possible to go up to 35 meters on a Category 6 cable. Another possible application is a 30 foot run at 3 Gigabit on a Cat 5e cable which should work correctly because its such a short run. If you have the luxury of trying out short applications you may be able to operate with cable rated at one lower category than the 100 meter rated cable for the required speed.

There are also considerations when the cable runs near power lines or fluorescent lights where there is a possibility of increased crosstalk, that may have to be dealt with. In a well designed Data Center cable layout, there are often 4 separate layers of cables including copper cables, fiber cables, power cables, and ground lines. Certain cable layouts have crosstalk considerations that can indicate the use of (ScTP) overall shielded pairs, or (STP) shielded pairs and overall shielding rather than (UTP) unshielded twisted pair cable.

Installation is also very important to make sure that the system supplies the standards that the components are designed to. Sloppy punch downs on the 110 Patch Panels may effect the system operation.

Also a Cat5E Jumper put serially into a system of Cat 6 cable components will bring the entire Cat 6 run down to a Cat 5e level or less.

Finally it is important to design the data system with the future requirements in mind. If the system will have to be upgraded in the foreseeable future to handle higher frequencies or longer runs or a combination of both, it is usually much more costly when the labor charges are taken into consideration to have to make any major changes. Therefore the level of cable should include the increased capability required in the future, on the initial installation.