DIY Epoxy LED Cube Lamp w/ Wireless Charging Base

How to make a DIY wireless-charging battery-powered epoxy resin LED cube lamp.
Subscribe to FILTER BUY and get a 5% discount:

Since this DIY LED cube light is battery powered and wirelessly charged it is totally portable and has a ton of uses — a mood light, a party light, a night light, etc. The video also shows how to make the custom wireless charging pad for the epoxy LED cube, which an easy woodworking project. This LED cube light is battery-powered by a LiPO.

I used Total Boat 2:1 epoxy resin to make the cube, doing small 1/2″ epoxy pours to build up the epoxy in the melamine form.

TOTAL BOAT 2:1 Epoxy Resin:

All the electronics are off the shelf parts from Amazon, including the music reactive sp106e LED controller.

FOLLOW ME on INSTAGRAM (@modustrialmaker)


o Heat Gun:
o Total Boat Epoxy Resin:
o 5V LED Strip:
o 5V music sync LED controller:
o LiPo Battery:
o Wireless Charging Receiver:
o Wireless Charging Pad / Transmitter:
o Battery Charging Protection Board:
o Aluminum Foil Tape:
o Epoxy/Plastic Polish:
o Fine grit sandpaper (to 2000 grit):
o Cordless Drill & Driver:
o Worldโ€™s Greatest Sander:
o Bench Cookies w/ Finishing Cones:
o Bench Cookie T-Track Risers:
o Universal T-Track:
o T-Track Clamps:
o T-Track Hold-down Clamps:



Solar Battery Charger MPPT base using Arduino UNO

Electronics Solutions
Solar Battery Charger MPPT base using Arduino UNO
For file’s
1. Code
2. Simulation with Proteus
3. PCB with Proteus
4. Video for help!
5. Gerber Files

Send Mail at Contact:


Mophie 7.5w Wireless Charging Base Qi Charger

Amazon – Mophie 7.5w Wireless Charging Base Qi Charger

Unboxing Mophie’s 7.5w Wireless Charging Base Qi Charger


Portable New Generation Qi Wireless Charger Charging Pad Universal Fast Phone Charge Base

Buy here:
Other Accessories:

Adopts QI wireless charging technology: Just put the QI standard smartphone on the wireless charging pad(the wireless charging pad needs connect with the data cable to get power supply), then it will start to charge the phone, very easy to use.
Wireless charging mode: It can directly charge the phone and no need any cable to connect it with the phone when charging.
Simple, safe and reliable charging: Only need to do one step and you can charge the phone in no time, safe and reliable.
Rapid charging: Swift and fast charging process controlled by smart chip, and it will protect the phone’s battery from over-charged. This wireless charging base can charge your devices in high efficient.
Safety guarantee: input over-voltage protection, output over-voltage protection, over-heat protection, short-circuit protection and heat dissipation to ensure safety for your phone.
It will bring a beautiful breathing lighting effect during charging process, which looks cool but very comfortable, and the soft breathing light won’t cause any interference to you even at night.
Small size and ultra-thin, lightweight and portable, and you can carry it to anywhere to charge your phone anytime.
Achieves wireless charging and avoids the problem of cable winded between the charging pad and the smartphone.
Universal compatibility: Compatible with QI standard smartphones, such as, works for Samsung Galaxy S6/S7/S6 Edge/S7 Edge, for Google Nexus 4/5/6/7, for Nokia Lumia 820/920/925/928/930/1020/1520/1520V, for HTC Droid DNA/HTC 8X, or for SONY Z3V/Z4V, and other smartphones that support Qi wireless charging technology.

Customer Service
Tomtop Official Facebook:


Phone Holder with Charger Base

๐Ÿ’ฅ๐Ÿ’ฅ๐Ÿ’ฅ BUY HERE ๐Ÿ’ฅ๐Ÿ’ฅ๐Ÿ’ฅ
๐Ÿ”ฅ๐Ÿ”ฅ๐Ÿ”ฅ NEW Coupons For Registered Users Only ๐Ÿ”ฅ๐Ÿ”ฅ๐Ÿ”ฅ

Multifunctional Phone Holder with Charger Base

Main Features:
โ— Multifunctional, phone holder and charger
โ— Suitable for different kinds of phones – 8 Pin / Micro USB / Type-C interface
โ— Base with interfaces can rotate 360 degrees at will
โ— Indication function for convenient use
โ— It can be charged via USB interface
โ— ABS material, elegant and durable
โ— Four anti-slip pad design in the bottom of the base for more stable use

โ— Input parameter: 5V / 2A
โ— Output parameter: 5V / 1A
โ— Charging current: 1000mA

Accessories type: Stand
Material: ABS
Dimensions and Weight

Package size (L x W x H): 12.50 x 10.30 x 7.50 cm / 4.92 x 4.06 x 2.95 inches
Package weight: 0.0960 kg
Product size (L x W x H): 10.00 x 10.00 x 6.00 cm / 3.94 x 3.94 x 2.36 inches
Product weight: 0.0820 kg
Package Contents

Package Contents: 1 x Phone Holder


Charge All Things with the Nomad Base Station

The Nomad Base Station is a sleek, modern wireless charging station with 2 additional ports to charge a total of 4 devices at the same time! Check out our hands-on review!

Nomad Base Station –


Nomad Base Station Charging Hub & Apple Watch Edition – Wireless Charging for iPhone & Apple Watch

Here is a closer look at the Nomad wireless charging for the iPhone and Apple Watch!

Base Station Charging Hub โ–ถ๏ธŽ
Apple Watch Edition โ–ถ๏ธŽ


Support the channel and shop through these affiliate links –

Shop Amazon โ–ถ๏ธŽ
Shop B&H โ–ถ๏ธŽ
Shop Adorama โ–ถ๏ธŽ


Music from Epidemic Sound โ–ถ๏ธŽ


Free 30-days of Amazon Prime โ–ถ๏ธŽ

Tip jar โ–ถ๏ธŽ


Official Website โ–ถ๏ธŽ
YouTube โ–ถ๏ธŽ
Twitter โ–ถ๏ธŽ
Instagram โ–ถ๏ธŽ
Google+ โ–ถ๏ธŽ


#AppleWatch #iPhoneXS #iPhoneXSMax