Battery Charger-Unboxing (Akü şarj cihazı, kutu açma)

If you want support my channel, click the bell-subscribe!

Donate: (if you send money)

Akü şarj cihazı, kutu açma, electronics, technology, elektronik, teknoloji, Battery charger, unboxing, Battery charger,


The Zeus: The most powerful portable battery starter?


The Zeus is a flashlight and dual USB Charger with enough power to jumpstart even the largest trucks on the road dozens of times. It can recharge your iPhone Plus from 0 to 100% up to 10 times. It can provide light for days on end.

For the times when there’s nobody at the other end of the jumper cables, the Zeus will get you back on the road and back on schedule.

20,000 mAh, 3.7V/74Wh
Dimensions 7.16 x 3.35 x 1.76 in / 182 x 85 x45 mm
Weight 1.4lb / 640g
Battery: High Rate Discharge Lithium Polymer
Input Recharging: 15V
Charge Time: 6-7 Hours
ECS Output: Supports 12V Battery System Vehicles
Output: USB: 5v/1A, 5v/2.1AZ
Bulb Type: Ultra bright LED light/SOS/Blink
Peak Amps: 1000A

Package includes: 1x car jump starter, 1x car charger, 1x power adapter, 1x user manual, 1x battery clamps, 1x cigarette lighter, 1x USB charging cable


Follow along!


Ryobi 9Ah Lithium+ HP Battery Box Opening! – SolelyRyobi Live

The Ryobi 9Ah Lithium+ HP Battery is here and we are going to open up the box!

Links to the Ryobi 9ah Lithium+ HP Batteries on Home Depot’s website:
Single Battery P194 ($139) –
Two Battery Pack P168 ($159) –
Four Battery Pack P169 ($299) –

*Two pack and four pack are special buys and may not last.


Portable Power Bank Case DIY Box 18650 Battery Charger for Digital Devices Gearbest Unboxing



18650 Battery Charger from jlcpcb

Using the boards from Philipp Seidel. I built out 2 quick chargers for my 18650 cell processing. Here is the build process for the first one. I have enough parts to build 10 of these. Thanks to jlcpcb for cheap boards and quick delivery.

[DIY Project] Reverse Protected 18650 Lithium-Ion Charging Unit

Wanna support me? Check out the links below – follow and subscribe!




Thank you for watching! If you liked this video be sure to subscribe to my channel and hit that thumbs up button!


Rechargeable RCR123A Batteries

is the largest web site for rechargeable batteries of all kinds: AA, AAA, C, D, 9V, digital camera, laptop and 2 way radios, battery packs, Li-ion, Li-Polymer, battery chargers, DC/AC inverters and other mobile power accessories.


ഇത് എന്താണെന്ന് മനസ്സിലായോ ????? Best AA and AAA Battery High Speed Charger

Best AA and AAA Battery High Speed Charger | Unboxing and Review In amalayalam

Buy Now Envie Battry Charger Flipkart :
Panasonic Battery Flipkart :
Facebook Page Link :
#Charger #unboxing


How to make battery chargers 3 volts and 9 volts

Hello my friends i will show you how to make two chargers for 3 volts (two batteries 1.5 volts) and 9 volts battery in home very simple and easy.I make on different ways so you can choose which is best way for you. In first way you will connect directly wires. Positive wire to positive and negative wire to negative. And on second way you will need female connector. Both ways are practical for use and they are real no fake. To charge 3 volts batteries i use adapter from old mobile phone with 5 volts output. To charge 9 volts battery i use adapter from old panasonic wireless phone with output 9 volts.

My channel :

My blog:


The things that you need

1. One charger with output 5 volts
2. One charger with output 9 volts
3. One female connector which is suitable to the charger 9 volts male connector (you can buy on local electronic market)
4. Battery holder for 2 batteries (1.5 volts)
5. One 9 volt battery connector
5.Two empty batteries 1.5 volts to test charging (try to find empty) and to be Rechargeable.
6. One battery 9 volts (try to find empty) and to be Rechargeable.

Tools that you need:

1. Multimer to check before and after voltage on batteries
2. Pliers
3. Soldering iron
4. Sealing tape
5. Glue

Breakdown – Take the Lead by Kevin MacLeod is licensed under a Creative Commons Attribution license





Extensive Review: HTRC C240 Duo // AC/DC Dual LiPo Battery Charger

Purchased on Amazon with Prime Delivery
Seems like a solid charger for bench or field
Amazon Link

In review:
Confirmation of end balance voltage
4s highest charge rate on AC input
4s highest charge rate on DC input
Menu walk through

★ DUO CHARGER: Duo LiPo charger can simultaneously charge two different batteries with different voltages, AC input max power 150W(CH1+CH2=150W), 100-240V; DC input max power 240W(CH1+CH2=240W) 11-18V; charge current 0.1-10A*2; discharge power 10W; discharge current 0.1-2A*2; 1602 LCD screen.
★ PRACTICAL FOR VARIOUS BATTERIES: 1-6s LiIon/LiPo/LiFe/LiHV; 1-15cell NiCd/NiMH; 2-20V PB battery; Smart Battery I,II,III 5-27V,0.1-6A.(Only charge the rechargeable batteries which meet this specifications of this charger).
★ MULTI-FUNCTION: Charge, Balancer, Discharge, Terminal Voltage Control, Lithium Battery Capacity & Voltage Checking, Battery Internal Resistance Checking, Lipo Storage Mode, Data Storage and Memory Loading, Lipo Meter, Digital DC Power.
★ SMART CHARGER: This balance charger allows you to memorize up to 20*2 datas of your battery and do not need you set the proper value of your battery while charging and discharging again.
★ PACKAGE INCLUDED: 1 x HTRC C240 Lipo Charger; 1 x AC Power Cable; 2 x XT60 Plug 2 in 1; 2 x T Crocodile Clip; 2 x Balance Board with Pin Cord; 2 x T Banana Connector; 2 x Tamiya; 1 x User Manual.


Charging an AGM Battery With The Viking 4 Amp Charger

Topping off my AGM battery with the Viking 4 Amp battery charger,
And selecting the proper charge mode!