5S26650 Lithium Battery Board that supports hybrid charging sources



WONDOM 5S 26650 lithium battery charger with battery protection components on board.Supporting wide charging voltage range and hybrid charging sources is one of the highlights of this board.Let’s see how it goes.
Link: http://store.sure-electronics.com/product/PS-BC12113

admin

Guest 2740A Board Battery Charger



More info at https://www.amazon.com/Guest-2740A-Board-Battery-Charger/dp/B07D1FS8FM?psc=1&SubscriptionId=AKIAJ3AMY47ILHSP6H3Q&tag=rapido06-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B07D1FS8FM

12V 40 amp 4 bank on-board battery charger
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
100% Waterproof (IP67) and shock resistant for all fresh and saltwater applications
Dedicated battery charging, sensing and control per bank
For all 12 volt flooded and AGM lead acid batteries. 2 year warranty
marinco 10 amp charger
guest 2 bank marine battery charger
marinco battery charger review
guest battery switch 2100 instructions
marinco india
guest battery charger troubleshooting
guest charge pro 10 amp
guest charge pro 6 amp
guest 8 amp onboard battery charger
guest 2304a battery switch
guest charge pro 2620
marinco guest
marinco 10 amp charger
marinco india
guest battery switch 2100 instructions
guest battery charger troubleshooting
guest total power management 8 amp
guest battery switch 2100 instructions
guest 30 amp marine battery charger
marinco charge pro 20 amp
24 volt smart charger
24v gel battery charger

admin

TP5100 Single 4.2V / Dual 8.4V 2A Lithium Battery Charging Board Review Test Tutorial



TP5100 Single 4.2V Dual 8.4V 2A Lithium Battery Charging Board http://bit.ly/TP5100_1S_2S_2A

Review and test of this neat 1 or 2 cell up to 2 Amps lithium cell charging board.

Skip to Testing 6:44

Data Sheet http://www.microlab.info/wp-content/uploads/sites/5/2018/06/TP5100-EN-autotranslated.pdf

UNI-T UT210E Clamp Meter http://bit.ly/UT210E_Clamp
ANENG AN8002 Multimeter Temperature Tester http://bit.ly/ANENGMultimeterTempTest
MUSTOOL G700 HD 1080P Portable Desktop LCD Digital Microscope http://bit.ly/LCDMicroscope
Four Wire Battery Test Rack http://bit.ly/Batt_TestRack

Input voltage: DC 5-18V(actual 5-12V is appropriate)
Charging status: full and no-load blue light, red during charging
The voltage setting must be operated in the power-off state, and the switch must be disconnected before switching.

Characteristic:

1. Dual / single 8.4V / 4.2V lithium battery charging
2. Built-in power MOSFET, switch mode, low device heat, simple external
3. Programmable charge current, 0.1-2A
4. Programmable precharge current, 10%-100%
5. No need for an external anti-sinking schottky diode
6. Wide operating voltage up to 18V
7. Red and blue LED charge status indication
8. Chip temperature protection, over-current protection, under-voltage protection
9. Battery temperature protection, reverse battery shutdown, short circuit protection
10. Switching frequency 400KHz, available inductance 20uH and above
11. PWR_ 0N-power, battery-powered switching control
12. Less than 1% charge voltage control accuracy
13. Trickle, constant current, constant voltage three-stage charging to protect the battery
14. Using QFN16 4mm*4mm ultra small package

Absolute maximum rating:

1. Static input supply voltage (vin): 20V
2. BAT: -8.4V~20V
3. BAT short circuit duration: continuous
4. Maximum junction temperature: 120℃
5. Working environment temperature range: -40℃~85℃
6. Storage temperature range: -65℃~125℃
7. Pin temperature (welding time 10 seconds): 260’℃

Application:

Portable devices, various chargers, smart phones, PDA, mobile cellular phones, MP4 or MP5 players, tablet PC, model airplanes, power tools, intercoms

Click Here to Subscribe http://bit.ly/1nformatica
Good source of electronic parts: http://bit.ly/ElecComps
Follow on Facebook https://www.facebook.com/1nformatica

If you would like to buy me a coffee: https://www.paypal.me/1nformatica

DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica

admin

Guest Battery Chargers Guest 2740A Board Battery Charger



Guest Battery Chargers Guest 2740A Board Battery Charger
More info at https://www.amazon.com/Guest-2740A-Board-Battery-Charger/dp/B07D1FS8FM?psc=1&SubscriptionId=AKIAJ3AMY47ILHSP6H3Q&tag=rapido06-20&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B07D1FS8FM

12V 40 amp 4 bank on-board battery charger
Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
100% Waterproof (IP67) and shock resistant for all fresh and saltwater applications
Dedicated battery charging, sensing and control per bank
For all 12 volt flooded and AGM lead acid batteries. 2 year warranty

admin

SoloGood 1S FPV Lipo Battery Charging Board XT60 2000mA 4.2V 🔋 Charger 🔌 FPV Racing Drone



Very simple multi charging unit , check it here https://amzn.to/2T5lyj9 , Night Cam here https://amzn.to/2H5sJRb Drone here https://amzn.to/2T6XCf6 SUPPORT THE CHANNEL here http://paypal.me/jaydrone

#drone #charger #runcam

admin

Li-ion Balancing and Protection Board BMS SIMULATION (How it Works)



EV-Customs Website – http://ev-customs.com/index.php/home/

Facebook – https://goo.gl/tu3Qdk

Music – Joakim Karud

The Orion Battery Management System (BMS) performs three primary functions:

It protects the battery pack from being over-charged (cell voltages going too high) or over-discharged (cell voltages going too low) thereby extending the life of the battery pack. It does this by constantly monitoring every cell in the battery pack and calculating exactly how much current can safely go in (source, charge) and come out (load, discharge) of the battery pack without damaging it. These calculated current limits are then sent to the source (typically a battery charger) and load (motor controller, power inverter, etc), which are responsible for respecting these limits.
It calculates the State of Charge (the amount of energy remaining in the battery) by tracking how much energy goes in and out of the battery pack and by monitoring cell voltages. This value can be thought of as a fuel gauge indicating how much battery power is left in the pack.
It monitors the health and safety of the battery pack by constantly checking for shorts, loose connections, breakdowns in wire insulation, and weak or defective battery cells that need to be replaced.
There are also secondary functions that the BMS performs:

Balances all the cells in the battery pack by intelligently bleeding off excess energy from cells that are charged more than others. This provides the maximum amount of usable energy (capacity) from the battery pack since the pack is only as strong as the weakest cell.
Monitors the temperature of the battery pack and controls a battery fan to regulate the temperature of the pack. Additionally, it constantly monitors the output of the fan to make sure it is working properly.
Provides real-time information and values to other devices such as motor controllers, chargers, displays and data loggers using several different methods (CANBUS, analog outputs, and digital outputs).
Stores error codes and comprehensive diagnostic information to aide in fixing problems with the battery pack should any issues arise.

admin

a manual for a mk 330 d on board charger


Tags: , , ,
admin

3S 20A Li-ion 18650 Battery Charger – BMS Protection Board 12.6V Cell / Low price



In this video unboxing for 3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Cell than lowest price in online
——————————————————————————-
Download Circuit diagram and detail – https://goo.gl/z2Q75P
https://goo.gl/KuHZZN
——————————————————————————-
buy material by the following a link

3S 20A Li-ion Battery 18650 Charger PCB BMS Protection Board 12.6V Cell –
Banggood – https://goo.gl/7jfnBM
Amazon – https://goo.gl/uy6YwM
——————————————————————————–

LM2596 dc-dc buck converter step down module =
Amazon – https://goo.gl/pxH5AR
Banggood – https://goo.gl/eg6WSn

MT3608 2A dc-dc Step Up Boost Power Module =
Amazon – https://goo.gl/c4Ys6P
Banggood – goo.gl/pKbCHe
————————————————————————————
Click the link see the more videos on the playlist

1)Monitoring & controlling project circuits – https://goo.gl/UUT2CG
2) Inverter circuits – https://goo.gl/xz33Uu
3) Chaser LED lights circuits – https://goo.gl/5aRnU4
4) DC Power supply circuits – https://goo.gl/yt4fuP
5) Remote control circuit – https://goo.gl/rJzx1d
6) LED-based circuits – https://goo.gl/pga5qh
7) Relay-based circuit – https://goo.gl/Q4r7XM
8) PIC Microcontroller project – https://goo.gl/9tNaVm
9) Relay-based circuit – https://goo.gl/J4u8BD
10) Battery controller circuits – https://goo.gl/YVHokC
11) Repair works – https://goo.gl/11uPxn
12)Transformerless power supply circuits – https://goo.gl/c9zv
————————————————————————————————-
buy more material by the following a link
1. Electronic Components Project Kit or Breadboard, Capacitor, Resistor, LED, Switch =https://goo.gl/1mBi3L
2. 1N4007 Mic 1A 1000V DO-41 Rectifier Diode Set Of 10 = https://goo.gl/X71hCp
3) 3pcs 3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Cell -https://goo.gl/7jfnBM
4) Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger PCB Module Board – https://goo.gl/xoo559
5) Drillpro 50PCS 1/1.5/2/2.5/3mm HSS Titanium Coated Twist Drill Bits High Speed Steel Drill Bit Set – https://goo.gl/NfW31A
6) 50CM SMD 5730 36 LED Rigid Strip Tube Bar Light Lamp With U Aluminium Shell + PC Cover DC12V – Milky White Cover White – https://goo.gl/Zmda4k

admin

On Board Battery Charger 3 Bank – Review



On Board Battery Charger 3 Bank
CLICK HERE : http://amzn.to/2u8Ji8z

On Board Battery Charger 3 Bank gives the right blend of high-generation and rugged construction. With a fully-sealed, water-resistant housing, the GEN1 can be established at once onto a diffusion of applications consisting of boats, tractors and a extensive variety of equipment. With the sensible NOCO VosFX processor constantly tracking the strength input, connected battery and charger itself, the GEN1 charger is capable of diagnosing, recovering, charging and maintaining batteries. On Board Battery Charger 3 Bank Automatically adjusts itself to converting contemporary wishes. Reverse polarity, brief circuit, open circuit, spark proof, overheat, overcurrent and overcharge. High-frequency, excessive-performance for a lightweight, compact charger. On Board Battery Charger 3 Bank batteries 2 times quicker than traditional linear battery chargers. 100 in line with cent full fee even with varying A/C input voltages. Safely expenses Wet, Gel, MF and AGM batteries. Automatically shuts off if charger stays in bulk charge mode for an extended time frame. One hundred in step with cent absolutely sealed. On Board Battery Charger 3 Bank charge Protects our devices from the most excessive environments and rated at IP68. Box consists of a charger, owner’s manual and user manual and product registration card. Three Year Limited Warranty and meets ISO 8846 marine requirements and ignition blanketed (US Coast Guard 33 CFR 183.410).

Some Features in On Board Battery Charger 3 Bank
IP68 Waterproof
a hundred% absolutely sealed, protects towards extreme working environments & rated at IP68.

Safe
Protects towards opposite polarity, sparks, overcharging, overcurrent, open-circuits, brief-circuits and overheating.

Firewall
Multi-degree safety barrier prevents unsafe and strange situations.

Optimization
Stabilizes internal battery chemistry for extended performance and sturdiness.

On Board Battery Charger 3 Bank
On Board Battery Charger 3 Bank Review
on board battery chargers for boats 3 bank
3 bank onboard marine battery charger
3 bank marine battery charger reviews
3 bank battery charger wiring
3 bank marine battery charger wiring diagram
promariner 3 bank charger



admin

Banggood missing board Battery Charging activation tool


admin