Eachine 6-in-1 1S LiPo Battery Charger Review & Testing – Part 1: Tiny Whoop Charger Comparison



This is a review and test of the Eachine 6-in-1 1S LiPo battery charger and the first of a series where we will test and compare the different options out there. To purchase this charger, see the link below or head over to our website for the full list of 1S chargers!

Hope this information is helpful. Like, share, and subscribe for more videos! Comments are always welcome. Thanks for watching!

Links –
Eachine 6-in-1 charger:
http://quadspex.com/bgeachine6in1charger
1S Battery Charger Comparison:
http://quadspex.com/1s-lipo-charger-comparison-tiny-whoop-1s-chargers/
BetaFPV Voltage Tester:
http://quadspex.com/betafpvtesteramazon

Equipment I use –
FPV Goggles:
Aomway Commander V1 FPV Goggles
http://quadspex.com/bgaomwaycommanderv1
Transmitter:
Taranis QX7
http://quadspex.com/qx7bg

Find other drones & accessories with an extra 20% off: https://goo.gl/v89dWn

admin

2000 Watt Power Inverter with 20 Amp Battery Charger 12 Volt DC to 110 Volt AC



For more information take a look at www.powerinverters.com

The (PIC-2000) Royal Power 2000 watt 12 volt dc to 120 volt ac power inverter with battery charger and automatic transfer switch allows you to setup this unit as a home UPS. By simply connecting the inverter to a 12 volt direct current battery source and plugging the AC charger cord into AC outlet in your home the backup system will be ready to use. When your utility power is available the built in battery charger will keep your batteries charged once fully charged the charger will go into a float mode. When utility power is lost or cut the inverters outlets will remained powered by using the direct current from the battery source. This inverter is perfect to be used with emergency home equipment like sump pumps and backup lighting.

The inverter attaches directly to a 12v DC battery supply. It has the ability to power on small load devices. It has durable reinforced panels on the interior which allows for the unit to be used in vehicles. Designed with the best quality components inside, all high grade resistors/transistors.
-Some applications that it can be used for are: incandescent lighting, tvs, small appliances (medium fridges, medium freezers steroes, fans etc..). Smaller power tools (drills etc..), small-medium pumps, kettles, pots, small heaters, microwaves.
This newly designed heavy duty inverter is made to with stand movement and vibrations commonly experienced in mobile settings. With the addition of reinforced steel bars holding all the interior components in place, this heavy duty inverter is ideal for all mobile applications. Also included newly designed Automatic Transfer switch, which turns this inverter to the ultimate home backup power supply. Plug house hold devices in the inverter and when the house power is cut the battery power will transfer over automatically.
** please check power requirements of your devices or call in for any questions

Features
2000 watts continuous power
4000 watts peak power
Provides 16.8 Amps
DC input voltage: 10.5-15V
Anodized aluminum case provides durability
Built-in Cooling Fan
Internal, Replaceable 30 Amp spade-type Fuses
3 3 Prong 120 volt AC outlet
Overload Indicator
Power ON/OFF Switch
Free 100ft Range Wireless Remote
Built-in Battery Charger & Automatic Transfer Switch
3 FT Battery Cables Included

admin

How REDARC In-Vehicle Battery Chargers Power 4×4 Adventure



Take an exclusive behind-the-scene look at 4×4 Adventure that demonstrates how the show relies on the REDARC BCDC in-vehicle battery chargers to charge all their gear whilst on the road.

REDARC’s range of BCDC in-vehicle dual battery chargers are designed, built and tested in Australia for our unique conditions to make sure they won’t let you down.

See https://www.redarc.com.au/battery-chargers/in-vehicle-chargers for more information on our range of battery chargers.

admin

How to make 12V DC battery charger at home । full wave bridge rectifier



hello guys, in this video I will show you How to make 12V DC full bridge rectifier using the 12V transformer. you need four 1n4007 diodes, 16v/470mf capacitor, one LED, one 1k resistor. please like, share, and DON’T forget to subscribe https://www.youtube.com/channel/UCWcHjIUFY8cR6nKf280jmeQ
If there is a mistake give me feedback. I will try better next time
Thanks for watching and have a good day…

admin

3000 Watt Power Inverter with 20 Amp Battery Charger 12 Volt DC to 110 Volt AC



For more information take a look at

http://www.dcacpower.com/product/3000-Watt-Transfer-Switch-Power-Inverter-Charger-12-Volt-DC-To-110-Volt-AC/10

The 3000 Watt 12 volt dc to 120 volt ac power inverter with 20 amp charger and automatic transfer switch is the perfect system you use with your back up emergency equipment of 24.25 amp or less. This type of wattage will cover most sump pumps and a large range of heating and cooling systems. By connecting this inverter directly to a 12 volt battery system and then plugging the ac charger cord to any home outlet your home UPS in now ready for use. The system will detect a loss of utility power and then switch directly to battery backup power. When utility power is available the charger will bulk charge the batteries until fully charge then go into a float mode. This unit also includes a digital monitoring system that displays battery voltage and wattage load applied.

The inverter attaches directly to a 12v DC battery supply. It has the ability to power on medium-high load devices. It has durable reinforced panels on the interior which allows for the unit to be used in vehicles as well as home use. Designed with the best quality components inside, all high grade resistors/transistors.
Some applications that it can be used for are: incandescent lighting, tvs, small appliances (fridges,freezers steroes, fans etc..) power tools (drills,saws etc..), pumps, kettles, pots, small heaters, microwaves, heaters, medium air conditioner units
This newly designed heavy duty inverter is made to with stand movement and vibrations commonly experienced in mobile settings. With the addition of reinforced steel bars holding all the interior components in place, this heavy duty inverter is ideal for all mobile applications. Also included newly designed Automatic Transfer switch, which turns this inverter to the ultimate home backup power supply. Plug house hold devices in the inverter and when the house power is cut the battery power will transfer over automatically.
** please check power requirements of your devices or call in for any questions

Features
3000 watts continuous power
6000 watts peak power
Provides 24.25 Amps
DC input voltage: 10.5-15V
Anodized aluminum case provides durability
Built-in Cooling Fan
Internal, Replaceable 30 Amp spade-type Fuses
4 3 Prong 120 volt AC outlet
Overload Indicator
Digital Amp~Wattage display Helps monitor overloads
Power ON/OFF Switch
Free 100ft Range Wireless Remote
Built-in Battery Charger & Automatic Transfer Switch
3 FT Battery Cables Included

admin

How to Use the REDARC BCDC Dual Input In-Vehicle Battery Charger



Shaun from 4WD Action reviews the next generation DC to DC In-Vehicle Battery Charger from REDARC.

The REDARC BCDC Charger is designed, built and tested right here in Australia, so you know it’s made to the highest of qualities. Proven to charge your batteries to 100%, this comprehensive in-vehicle battery charger is a must have on your next road trip or free camping adventure.

Discover more at https://www.redarc.com.au/dual-input-25a-in-vehicle-dc-battery-charger

admin

Behind the Scenes with WUDU – Making our In-vehicle Battery Chargers



What’s Up Down Under show behind the scenes footage of how our In-vehicle Battery Chargers are made.

REDARC have manufactured In-vehicle battery chargers in Australia for more than 35 years. For more information, visit: https://www.redarc.com.au/battery-chargers

admin

How to make 12V DC battery charger by using full bridge rectifier circuit



This video will show to how to make a 12V DC battery charger by using a 3A transformer, four 1n4007 diode, one LED, one 4.7k resistor. In this tutorial basically used a full bridge AC to DC converter rectifier circuit. Make this charger today and enjoy… Love you.

See Another Video:
How To Make High Force AK-47 Rifle That Can Split Glass

BG Music: https://goo.gl/irRB
Twitter: https://goo.gl/i6TShc
Facebook: https://goo.gl/tWgYbU
Blog: https://wp.me/p519Ie-4bp
Google Plus: https://goo.gl/w6qcbS

admin