Battery Charging Current – Charging And Discharging Time Calculation (Hindi & Urdu)



From this video you will learn that ” how much current required for your battery charging, in how much time required for battery charging and discharging the battery. This is the complete calculation of battery Ah (ampere hour) with charging current ampere and battery charging tips in Urdu & Hindi language.
موجودہ بیٹری چارج کرنے کی ضرورت ہے – چارج چارج اور وقت ختم کرنے کا حساب (ہندی اور اردو)

बैटरी की आवश्यकता वर्तमान में चार्जिंग – चार्जिंग और डिस्चार्जिंग टाइम कैलकुलेशन (हिंदी और उर्दू)

For more video visit
www.electricaltutoirals.org

To Contact Us
http://www.electricaltutorials.org/p/contact-us.html

Social media profile
Facebook : https://www.facebook.com/sikandarkhan641

Twitter : https://twitter.com/sikandar_haidar

Thanks for Watching…………..

admin

Medical device design considerations: charging and discharging the battery



View our portfolio of chargers
http://www.ti.com/power-management/battery-management/charger-ics/overview.html

When working with any rechargeable battery extreme care must be taken when
charging any chemistry. A wrong charging profile or charge voltage and you
can at best reduce the useful life of a battery and at worst completely
destroy the device. This video will cover how Texas Instruments charges its
batteries, the benefits of accurate charging, the consequences of careless
charging and how low leakage chargers and bucks allow you to use your devices
longer.

admin

Off-grid solar systems: Battery charging and discharging at the same time. Tips/advice.



Always try to get your battery bank fully charged every day (100% SOC). Here is a video that shows real world partial off-grid solar power battery bank charging and discharging tips/advice.

admin

Simple DIY 18650 Battery Charger – TP4056 Review (Everything Explained)



18650 lithium-ion cells.

These type of batteries are very popular nowadays. And a good charger is very expensive.
This is the most detailed tutorial on how to make your own cheap but very good – 18650 battery charger.
For each cell you need a charging module and a battery support.
For a charging module – TP4056 is the best choice.
you need to connect every battery holder to a charging module. Then connect every module inputs to a power supply of 5 volts.
You can glue all the parts to a plywood base, or connect them on a single plated copper clad board.

Charging module: https://www.optimusdigital.ro/ro/electronica-de-putere-incarcatoare/1713-incarcator-tp4056-cu-micro-usb-pt-baterie-lipo-1a-cu-protectie-pentru-circuite.html
Battery support: https://www.optimusdigital.ro/ro/suporturi-de-baterii/942-suport-de-baterii-1-x-18650.html

————————————————-
Song: Culture Code – Make Me Move (feat. Karra) [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: https://youtu.be/vBGiFtb8Rpw
Download: http://NCS.lnk.to/MakeMeMove

Song: Jim Yosef – Can’t Wait (feat. Anna Yvette) [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: https://www.youtube.com/watch?v=MqUCDzom5Xw
Download this track for FREE: https://www.hive.co/l/28rek

admin

Overview Revolectrix Cellpro PowerLab 6 v2 6S LiPo battery balancing charger 40A 1000W PC interface



BrunoPOWEEER is everywhere:
https://www.instagram.com/brunopoweeer
https://www.facebook.com/brunopoweeer
https://www.patreon.com/BrunoPOWEEER
https://www.youtube.com/c/brunopoweeer

Revolectrix Cellpro PowerLab 6 v2 balancing charger for up to 6S LiPo batteries fast charge and discharge at 40A 1000W + MPA board + FUIM3 PC USB Interface Overview

Fantastic device if you are running large LiPo packs, connected to your PC via USB and compare charge and discharge curve in each cell.

Connect up to 6 same count cells at same time with different capacity or charge state, it saves you a lot of time!!!

I paid USD$257 on eBay (link below)

COMBO 7 Revolectrix Cellpro PowerLab 6 v2 6S/40A/1000W BATTERY CHARGER MPA FUIM3
http://www.ebay.com.au/itm/131163648214?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

admin

DIY Super Simple 18650 Battery Charger | Best on YouTube



Best & Fast PCB Supplier ($2 for 10pcs 10*10cm): https://jlcpcb.com

Hi YouTube in This video I’m Going to Show You How to make Super Simple 18650 Battery Charger

If you Have any Question Please Comment.

Where To Buy “Cheapest”

Banggood
———————————————————————-
1. TP4056 Module: https://goo.gl/A8W9BA
2. Battery Holder: https://goo.gl/V8eW8R
3. Soldering Iron: https://goo.gl/C8pNLU
4. EPAI Metal Base: https://goo.gl/z1Uf73
5. Kapton Tape: https://goo.gl/b2nUEE
6. PCB Standoff: https://goo.gl/id5Dva
7. XT30 Connector: https://goo.gl/T8uxyC
———————————————————————-

Amazon
———————————————————————-
1. TP4056 Module: https://amzn.to/2PjE6ql
2. Battery Holder: https://amzn.to/2MzdnHO
3. Soldering Iron: https://amzn.to/2MufZqz
4. EPAI Metal Base: https://amzn.to/2nMMhyV
5. Kapton Tape: https://amzn.to/2vUp6Hr
6. PCB Standoff: https://amzn.to/2vW6eYJ
7. XT30 Connector: https://amzn.to/2nQ9mAG

———————————————————————-

Aliexpress
———————————————————————-

———————————————————————-

Gerber Files – https://goo.gl/T2UZff

Tags
18650 Charger
Homemade 18650 Battery Charger
DIY 18650 Battery Charger
18650 Li-ion Battery
LG18650B4

Stuff I use

Camera – http://amzn.to/2wCT2Hb
Prime Lense – http://amzn.to/2eBcmMC
Main Lense – http://amzn.to/2wBteg0
Editing Mechine – http://amzn.to/2eGhIdm
Multi-Meter – https://goo.gl/b59PAS
Lithium Battery – https://goo.gl/PeytL5
Battery Status Indicator – https://goo.gl/Rfa6eA
Mustool® MT223 60W Soldering Iron – https://goo.gl/iH7d5C

Share, Support, Subscribe!!!
Youtube: https://www.youtube.com/c/SteveWillsonKujur
Facebook: https://www.facebook.com/SteveWillsonKujur
Twitter: https://twitter.com/SteveWillsonK
Google Plus: https://plus.google.com/+SteveWillsonKujur

admin

My DIY 18650 Battery Charger



Today I’m going to show you how I’ve build a more complex 18650 battery charger. I got all the electronic components from banggood.com. I tested all the components before starting the project and they are all ok. The electronic parts cost 6.5 euros / battery.

Parts list:

Mini voltmeter: https://www.banggood.com/MINI-DC-0-32V-3-Digital-LED-Display-Voltmeter-p-1216060.html?rmmds=cart_middle_products&cur_warehouse=CN
10W 10ohm resistor: https://www.banggood.com/10w-10-ohm-10J-Ceramic-Cement-Power-Resistor-Flame-Resistance-5-J-p-1270032.html?rmmds=cart_middle_products&cur_warehouse=CN
Charger module board: https://goo.gl/2tNUgV
Battery Holder: https://goo.gl/iCaigG
LED Light Assorted Kit: https://goo.gl/qo3j4K
Switch: https://goo.gl/DYgVm6
300 resistors kit: https://goo.gl/rhgbjR
6.18 Mid Year Sale up to 80% off: https://goo.gl/mjYAaz
log in banggood app and enjoy 10%off app coupon: https://goo.gl/nuFskU
10% off universal coupon code for Electronic except 3D printer, valid until 31st Dec. 2018.
US warehouse: USELE10
EU warehouse: EUELE10
AU warehouse: AUELE10

—————– Music —————–
Track: T-Mass – Ignoring My Heart [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/eT0tYnWX2sQ
Free Download / Stream: http://ncs.io/ignoringmyheartYO

Track: Kozah – Haha [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://www.youtube.com/watch?v=vVblNX7YSdU
Free Download / Stream: http://ncs.io/HahaYO

Track: ÉWN – Feels (Original Mix)
Music provided by NoCopyrightSounds.
Watch: https://www.youtube.com/watch?v=ZevEW7zwslA
Download this track for FREE: https://www.hive.co/l/2b4qv

Track: Raven & Kreyn – So Happy [NCS Official Video]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/cmVdgWL5548
Free Download / Stream: http://ncs.io/SoHappyYO

Track: Andromedik – Firefly [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/UPzCs-J4AUU
Free Download / Stream: http://ncs.io/FireflyYO

admin