How to Make a Emergency Mobile Phone Charger Using 9 Volt Battery at Home | DIY Emergency Power Bank



How to Make a Emergency Mobile Phone Charger Using 9 Volt Battery at Home, How to make a Power Bank at Home with 9 Volt Battery, make power bank with 9 volt battery, 9 volt battery power bank at home easy – way, How to Make a Emergency Mobile Phone Charger Using 9 Volt Battery at Home | DIY Emergency Power Bank
#howtomake #diy #homemade #EmergencyMobilePhoneCharger #Using9VoltBattery #EmergencyPowerBank #athome

Topic Covered :-
1. how to make a emergency mobile phone charger using 9 volt battery at home
2. 9 volt battery hack
3. how to make an emergency mobile charger using 9v battery
4. diy how to build emergency mobile phone charger
5. make power bank with 9 volt battery
6. 9 volt battery power bank at home
7. how to charge your phone with a 9 volt battery
8. how to make a power bank with 9 volt battery and ic 7805 at home
9. 9 volt battery hack 2018
10. 9 volt battery hack phone charger
11. 9 volt battery hack video
12. diy how to build emergency mobile phone charger at home

Things Required to Make a emergency mobile phone power bank at home:-

1. Plastic Bottle Cap
2. Wire
3. Female USB Connector
4. 9 volt battery
5. 9 volt battery clip
6. 7805 IC
7. Glue Gun & Stick etc…
how to make a power bank with 9 volt battery and Ic 7805 at home..

Feel free to comment below in comment box and don’t forget to SUBSCRIBE if you like my Videos like Comment Share.
More Updates: Please Subscribe Our YouTube Channel click – Link:
https://www.youtube.com/channel/UCadE1jxDHpTOpOjutQuTO_g
https://plus.google.com/u/0/102985623276217894759

https://www.facebook.com/Mr-Invento-194290667743134/
Music by nocopyrightsounds

admin

REVA G-WIZ: DIY electric car lithium ion upgrade – Installing the charger and a general update



I installed one of two chargers today and wired it up to the existing 230v wiring so that I can use the original charge port.

The charger is set to 54.6v and 54 amps so that it can run on a standard 230v UK mains socket. I will have two installed with the option to use one or both. Using both will be wired into a 32 amp circuit and either a 32 amp CEE or type 2 socket with a conversion that can plug into any 7kw type 2 charger. I might also see if I can have it work with larger systems as tethered chargers seem to be the most common at service stations.

Everything else is running smoothly and there is little more that needs to be done other than waiting for the other half of my battery bank to be finished. For extra safety I will fuse or fit circuit breakers to each pack. I will also change the heavy lead acid 12v auxilary battery to a 48v lithium with a DC step down converter but it will be separate to the other batteries so that I do not blow the converter again.

Here is the link to the 3000w adustable universal charger in my video: https://eauto.si/metron-shop/product/type2cee-3x16a-3-phase-carrier-case-copy/

admin

DIY Camper/RV Fast Battery Charger Swap – 3 Stage Charging – AC to DC Converter/Charger by POWERMAX



Powermax AC to DC Converter/Charger
PM3-12V LK Series

Features
-Available in 15, 35, 45, 55, 60, 75, 85, 100, 120 Amps
-Built-in 3 Stage charging and fixed single output modes
-Fixed output mode voltage can be set between 13.0 Vdc to 16.5 Vdc
-Quiet fan cooling
-Reverse Polarity, Overload and Thermal protection
-2 year warranty

admin

How To Make DIY 18650 Battery Charger Using TP4056 Module



$2 for 10 PCB & Free Shipping on First Order: https://jlcpcb.com

Hello guys, in this tutorial I am going to show you how to make DIY 18650 Battery Charger, So let’s get started 🙂

▽Here’s the parts list:
1) TP4056 Charging Module –
2) Battery Holder –
3) Self Locking Switch –
4) XT60 Connector –

➤Here’s The Gerber File Link : http://www.mediafire.com/file/v63qqqvln9ro9n2/18650_Battery_Charger_Gerber_File.zip/file
➤Here’s The Circuit Diagram And Schematic : https://easyeda.com/SurajitM/diy-18650-li-on-battery-charger

Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
—————————————————-
🎧 Background Music
Morning by LiQWYD https://soundcloud.com/liqwyd
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
http://creativecommons.org/licenses/b…
Music promoted by Audio Library https://youtu.be/lv8LMI0NdaM
—————————————————–
➤Here my social sites:
Facebook: https://www.facebook.com/surajit.maju…
Instructables: http://www.instructables.com/member/S…
twitter: https://twitter.com/DIYBuilder1
Instagram: https://www.instagram.com/surajit_maj…
————————————————————-
★★★TAGS★★★
#18650BatteryCharger #DIYBatteryCharger #Li-ionBatteryCharger
18650 Battery Charger, How to make Li-ion Battery Charger, TP4056 Battery Charger,
Battery Pack, TP4056 Parallel Charging, tp4056 micro usb 5v 1a 18650 lithium battery charger pcb board with protection module, DIY Battery Pack

admin

DIY Lithium Battery – Choosing a Charger – Part 5/5



For part 1: battery layout, see here: https://youtu.be/b3eRv_FZjBc
For part 2: spot welding, see here: https://youtu.be/ublFs7IU05c
For part 3: BMSs, see here: https://youtu.be/u-4mKh1WaLo
For part 4: Cases, see here: https://youtu.be/ALshbpGkMtc

Charger shopping links:

Good source for plastic and aluminum case chargers: https://goo.gl/js0T0V
Luna chargers: https://goo.gl/5NWxKh
EM3EV chargers: https://goo.gl/YMMC8n
Cycle Satiator charger: https://goo.gl/QyoLjf

The parts I use for battery building:
18650 cells (Sanyo GA 3500mah): https://goo.gl/J6ONJV
18650 cells (another Sanyo GA 3500mah source): https://goo.gl/f10wHH
18650 cells (Samsung 26F 2600mah): https://goo.gl/VhpP7T
18650 positive insulating washer: https://goo.gl/HBVOuc
Ebike battery cases: https://goo.gl/W2DLmE
Nickel strip: http://goo.gl/VIrNQq
Spot welder: https://goo.gl/KN3Uaw
BMSs: http://goo.gl/S6gSQx
Silicone wire: http://goo.gl/xmpbKD
Black 18650 cell spacers: http://goo.gl/hQxWF6
Large heat shrink tubing: http://goo.gl/6v1ow9
Small heat shrink tubing: https://goo.gl/OU3Z6u
Foam sheet for protecting battery: http://goo.gl/5e71tE
Kapton tape: https://goo.gl/D6BT57

If you’d like a written step-by-step guide showing how to build an electric bicycle battery, see my article here: http://www.ebikeschool.com/how-to-build-a-diy-electric-bicycle-lithium-battery-from-18650-cells/

admin

How to DIY Battery Charger for AA batteries



MX battery charger can charge your all kind of AA, AAA, 9V Batteries. Now you can charge your batteries in a simple and easy way with the help of MX Battery Charger. MX Battery charger is light in weight, economical and unbreakable.

Product Link: http://mdrelectronics.com/ProductDisplay.asp?PID=1071

Please subscribe to our YOUTUBE Channel: MX Electronics (MDRElex)
You can also Like our Facebook Page: http://www.facebook.com/mxelectronics

This video is a complete guide, however if you have any questions feel free to comment or send us an email on info@mdrelectronics.com or visit our website www.mdrelectronics.com

If You Have Any Complaints, Queries Or Suggestions, Call Us On
(022) 4253 6666 Or You Can Mail Us At info@mdrelectronics.com

admin

Portable Solar Generator DIY Reveal Pt. 4 600 watt Pure Sine Wave Inverter



This video is about portable solar generator reveal and almost finished project. I will be talking about the 600 watt pure sine wave portable solar generator and the internal components a little bit. I will be showing the portable solar generator running and testing it. I will be showing you and talking about the FREE Ravpower 20100mah portable power supply. I will be doing a give away for the Ravpower on my website westhattechguy.com when I reach 500 subscribers! Be sure to subscribe and like a video and go to my website to sign up for the FREE give aways.

To visit our website click below:
http://westhattechguy.com

https://www.facebook.com/WesThatTechGuy/

If you would like to view or purchase any of our SolarGeni Portable SolarGenerators go to:

https://bit.ly/2Iyv09X

If you would like to view or purchase any of our batteries shown go to”

https://bit.ly/2Ea8b7a

If you would like to view or purchase any of our SolarGeni LifePO4, Lithium, or Tesla battery chargers go to:

https://bit.ly/2EvB1A2

If you would like to purchase any of our inverters go to:

https://bit.ly/2SW4qwh

If you want to build your own generator, and need supplies you can check out our Amazon store by clicking below:
http://solargeni.com/Amazon

This video shot and edited by Derek Smith
https://konrad89studios.com

Facebook @ Konrad 89 Studios
Instagram @Konrad89Studios

admin

DIY lithium ion battery charger (charger battery simple)



Simple lithium ion battery charger

admin

DIY 12v Battery Charger



#ideas #video #diy

DIY 12v Battery Charger

Tags: , , ,
admin

DIY 576 watt hour Portable Solar Power Generator



Hello Everyone
In this video we are building a 576wh #portable #solar #generator for off grid or grid down power. This kind of solar generator is useful for many renewable power applications. Once build and put in to use, it generates 100% free energy for emergency power, communications, amateur radio, boondocking, van or RV life, to keep food or meficine refrigerated during grid down emergencies.

Main features
– 576 watt hours, 45amp hours
– 2000 charge cycles
– 30A ports
– 2x USB ports
– Internal Bluetooth battery monitor
– 4x DC Powerpole ports
– Every port is individually fused
– MPPT charge controller
– Dual Solar inputs
– Total weight 18lbs (8.3kg)
– Easy maintenance
– Replaceable Components
– Optional pure sinewave inverter
– Easy to build

The closest commercial product is the Goal Zero Yeti 400 Lithium. Our diy solar power generator will outperform the Yeti Lithium, (unless you need an inverter), the Yeti has one built in, but an onverter is optional in the DIY Solar Generator . Most people don’t need AC power or the inverter with a solar generator. They just need tthe right connectors for their gear.

An interesting feature on the solar generator is the wireless battery monitor from Thornwave labs. The battery monitor is a Bluetooth enabled shunt using Bluetooth SE to send information about the state of the system straight to our mobile phone. it’s also got an API to get data out to something like a raspberry pi or arduino for data logging.

Episode and build notes.

How to build a Portable Solar Power Generator 12v LiFePO4

Share this video: https://youtu.be/Nf9X4YIK9xA

Parts List:
Headway LiFePO4 Cells: https://goo.gl/NencLf
Bestech BMS 4S LiFePO4: https://goo.gl/JYHJLD
Enclosure: https://amzn.to/2BGleMV
Genasun MPPT Charge controller: https://amzn.to/2DTDse7
Powerpole USB: https://amzn.to/2DPzHqc
Alt Powerpole USB: https://amzn.to/2XacPKY
Powerwerx Powerpole POD: https://amzn.to/2V76azr
45A Powerpoles: https://amzn.to/2Xad7RT
Powerwerx Powerpole crimper: https://amzn.to/2X852NA
Thornwave Bluetooth Shunt: https://amzn.to/2ElUhkH
Powerpole distribution board: http://www.k9jeb.com

Pedal generator seen in Video
K-TOR PowerBox 50
https://amzn.to/2BI9Mk0

Need help?
Join my Patreon Community.
Want help in private? use the Tip-Jar link.

The Solar Generator build was also a featured Instructable on http://www.instructables.com There are lots of full HD images of the project there as well: https://www.instructables.com/id/576-Watt-Hour-Portable-Solar-Generator/

If you found this post useful, entertaining, inspiring, or educational, consider dropping a buck in the tip jar, join my Patreon, or check out my Amazon list.

PayPal https://www.paypal.me/oh8stn/1usd/
Patreon http://www.patreon.com/oh8stn
Amazon http://www.amazon.com/shop/oh8stn
73
Julian oh8stn

admin