FPV Life Hack: Portable LiPo Battery Charging: How to Charge Batteries w Field Charging Station



Official Website: www.BigJimFPV.com

Portable Lipo Battery Charging Life Hack: How to Charge Batteries in the Field with Charging Station:

Just a quick DIY video on a portable lipo charging station I made. No generator or large car batteries to carry around, this one fits into the bottom of my FPV bag and I get over 5 re-charges of my flight batteries with this setup. Links to the charger and batteries below!

Charger: http://amzn.to/2s5888R

Battery to Power Charger: http://amzn.to/2rVU0hp

My Flght Batteries: http://amzn.to/2sTDmw3

admin

Excellent & Simple Battery Charger (Gel/Lead Acid/Li-Ion/+ more)



This circuit has been in use for 24 hours a day over the past 4-6 months. It operates perfectly. I used this circuit to charge two 18650 Li-Ion batteries for my cordless vacuum cleaner. You can charge many different battery types with this circuit. If you charge (2) Li-Ion batteries in series as I did, be sure to affix a 3A/ 70-90 degree Celsius thermal fuse between both batteries using thermal heatsink compound and foil tape. The fuse will then be wired in series with the 2 batteries. Also set charger output voltage to 8.33V – 8.36V, and use a 1 ohm resistor in the circuit.

Schematic here:

http://www.talkingelectronics.com/projects/200TrCcts/101-200TrCcts.html#84B

Thanks For Watching!

***If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a “THUMBS UP”, and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)***

admin

Solar Panel Giveaway! (Battery Maintainer & Charger)



Today I’ll be showing you a very nice, high efficiency, polycrystalline tempered glass 12W solar panel made by Suner Power. This panel can be used to maintain higher capacity lead acid batteries, charge all 12V lead acid batteries, or even power 12V devices/electronics that draw between 500 and 750mA of current. Enjoy the video, and be sure to take part in this giveaway so you have a chance to win one of these solar panels!

Product Links:
Suner Power 6W Solar Panel(Ideal for maintaining lower capacity lead acid batteries): https://amzn.to/2OToYzI
Suner Power 12W Solar Panel(Ideal for higher capacity lead acid battery charging or powering devices): https://amzn.to/2OsfhaC
(Amazon Affiliate Links)

Digital DC-DC Step Down Converter: https://bit.ly/2nuruQl
Digital Multimeter shown in video: https://bit.ly/2rapahk
(Use money saving discount codes shown below for Banggood)

Contest Link::
https://gleam.io/tQYMt/suner-power-12w-polycrystalline-solar-panelcharger-giveaway
(Duration of Contest is 10 Days. Once a winner has been chosen at random, I will post the winner’s name in the video comment section)

**Help me make more videos by visiting the link below. All donations, big or small, would be greatly appreciated. Thank you!
http://paypal.me/electronicsNmoreYT

Lee Almond: Thanks for your generous $25 Paypal donation!
Ralph Noback: Thanks for your generous $10 Paypal donation!
Bobby Tectalabyss & Maxfield Sohn: Thanks for your generous $5/mo donation!

**For GREAT deals(Usually cheaper than EBAY) on other electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)

Home Page: http://bit.ly/2wDbRdi
Flash Deals: http://bit.ly/2eBLkVI

**Try these money saving coupon codes: affiliate6 or aff7off or f8aaf1 or 781622 or 5719ed or elec** or ask if other codes are available!

Thanks For Watching!

***If you enjoy watching my videos, then be sure to SUBSCRIBE, POST LINKS to my videos on other websites & blogs, rate “THUMBS UP”, and check out my video playlists. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future. (Views are absolutely essential to ensure this channel remains in an active state)***

admin

9V Alkaline Battery Charging Circuit(Also 1.5v Cells)



Learn how to make a good alkaline battery charger which is NOT likely to cause the batteries to leak or bulge, and will charge them properly. Though alkaline batteries are not intended to be recharged, they do seem to recharge well using this circuit. I put together this circuit from information obtained from the web page below. The circuit shown in the video was designed for 9V batteries, but you can also charge 1.5V (AA/AAA/AAAA)batteries by lowering the power supply voltage. The batteries are charged using low current DC pulses.

http://en.wikipedia.org/wiki/Recharging_alkaline_batteries

Schematic is here:

http://tinypic.com/m/k0oya1/4

For fully charged 9V LED indicator circuit:

http://tinypic.com/m/k0oydz/4

Thanks For Watching! Please SHARE with others, rate THUMBS UP, and SUBSCRIBE.

admin

Bedini SSG Battery Charger/Desulfator



This circuit uses a 12v battery to charge other 12v batteries to a higher voltage. According to John Bedini, you are getting more out of the circuit than you put into it(Which I have not proven). The high voltage that is created to charge the 12v battery is created by the back EMF from the coil.

Circuit/Schematic located here:

http://rpmgt.org/JoinBediniList.htm

Thanks For Watching!

***If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a “THUMBS UP”, and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)***

admin

12V Lead Acid Battery Charger(Homemade)



I took a MOT and carefully stripped out the 2000V Secondary and replaced it with a low voltage high current winding of 18-20T or 12ga wire. New fully rectified DC output is 15.8VDC. An electrolytic capacitor of 1500uf was also added for smoothing purposes(Not much smoothing is required for charging lead acid batteries). Also includes a voltage monitoring circuit which allows you to know when the voltage of the battery being charged has reached completion. A green LED will be brightly illuminated to let you know to unplug the charger.

Schematic Here:
http://tinypic.com/m/k0oy94/4

The circuit in the schematic above will connect to this automatic charging cut-off circuit, then to the battery to be charged:

**Help me make more videos by visiting the link below. All donations, big or small, would be GREATLY appreciated. Thank you!
http://paypal.me/electronicsNmoreYT

**For GREAT deals(Usually cheaper than EBAY) on other electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)

Home Page: http://bit.ly/2wDbRdi
Flash Deals: http://bit.ly/2eBLkVI

**Try these money saving coupon codes: affiliate6 or aff7off or f8aaf1 or 781622 or 5719ed or elec** or ask if other codes are available!

Thanks For Watching!

***If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a “THUMBS UP”, and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)***

admin

Inductive Battery Charging Circuit (NiMH/NiCd)



Learn how to make a simple inductive battery charger for your NiMH/NiCd rechargeable batteries(2 to 4). The circuit in the video is for charging (2) batteries in series. This circuit operates in a very similar way as an ultrasonic toothbrush charger. The charging rate is slow(25-30mA), which can be made higher if desired, but it does charge well. The toothbrush charger uses a PWM IC to produce the high frequency pulses (75khz) into the primary winding with feedback to adjust the output under load, and this circuit uses a 555 IC to produce 42-46khz pulses into the primary winding to simplify the circuit. The transformerless power supply shown in this video is designed to power the exact circuit shown in this video. If you modify the primary winding and the circuit draws more current, then you will have to modify the transformerless power supply to deliver more current. You can also power the circuit using a very small 12V transformer. Don’t be afraid to experiment with different coils/windings!

**To support this channel, please share these videos with others, post links to this video as well as my other videos on other websites and blogs, and SUBSCRIBE.**

Thank You For Watching!

Link to Charger Schematic:

http://tinypic.com/m/k0oydw/4

Link to Transformerless Power Supply:

http://tinypic.com/m/k0oydv/4

admin

Charge Your Phone using COIN – Amazing Life Hack – Science Experiment



Buy amazing bluetooth headset – Leophile EEL Review Video https://youtu.be/tm4UVcMCjGg
☑️☑️gearbest.com. ❤❤http://bit.ly/2xDh5ca
☑️☑️Amazon.com ❤❤http://amzn.to/2xDTtUS
☑️☑️Amazon.co.uk ❤❤http://amzn.to/2y2Fzbd
☑️☑️Amazon.in ❤❤http://amzn.to/2x3K5XD
☑️☑️Ebay.con ❤❤http://ebay.to/2webDMJ

MyFone iPhone Space Saver & Privacy Eraser:https://www.imyfone.com/iphone-data-eraser/
How long coin battery will last https://youtu.be/au7ayZWTfbg

How to make your Headphone Wireless (Even Broken Headphone)

Three amazing coin battery experiment, Run emergency led light, charge your phone using coin.

If you use copper coin every cell will produce .7 to .8 volt 2 – 4 ma.
for 5 volt we need at lest 8 cell
So if you want to charge you mobile phone at 500 mp
you need 500*8 = 4000 coin.
I don’t have this much coin but if you make this much cell definitely it gonna charge you phone.

How to make a portable charger?
Home made portable power bank.
coin Charger
Turn Coins into mobile charger USA. America
turn penny to gold changing
gold penny experiment explanation
Münze in Aufladeeinheit drehen

We regularly uploads exciting videos like this ,
Suscribe us For More Videos – https://goo.gl/qzUGMO

You Can also Watch
▼ Amazing Old Broken HeadPhone Repair Hack Using same Jack
→https://youtu.be/3-6JYhsX-6c

▼Amazing LifeHack – Dual Sim and MicroSD card working Same time (simultaneously)
→https://youtu.be/6kAeF3BdHlw

▼Amazing Handmade 3D POP-UP MUSICAL Birthday Card
→https://youtu.be/O75mxUczLn4

▼Amazing USB OTG Super Bright Led Bulb – DIY
→https://youtu.be/m-Vtatwq3nE

▼ Amazing Old Broken HeadPhone Repair Hack Using same Jack (Super Easy)
→https://youtu.be/3-6JYhsX-6c

How to Make a Emergency Mobile Phone Charger – For Smart Phones

Music : Invisible (Vibe tracks)

******************************************************************
Subscribe To me: https://goo.gl/qzUGMO
Twitter : https://twitter.com/roytectips
Facebook : https://www.facebook.com/roytectips/
******************************************************************

admin

DIY BATTERY HACK – USB 18650 charger & discharger made from a USB battery bank



I used a single-cell usb bank to charge a single cell at a time. I also have a 4-cell usb bank which I would NOT use to charge less cells than 4, as there is increased risk of oversupplying the cells with power.

I actually fried this chip pretty quickly by connecting up a cell the wrong way, positive to negative and negative to positive. Instant hissing and magic smoke! If I had known the circuit was not protected I would have added a diode to protect it.

admin

Homemade 6V / 2.5 Amp Power Supply/Battery Charger



If your looking for a HIGHLY efficient (6VDC 2.5A / 6VAC 3.0A) power supply or 6V lead acid battery charger, then look no further. This power supply/charger is made using a 120V (MOT) microwave oven transformer, by performing the modifications shown in this video. 120V transformer current at idle(NO LOAD) only draws 30mA, and using a full 2.5A load, 200mA. NO heating issues of the core whatsoever. As usual, always be very careful when working with 120VAC/240VAC projects!

Thanks For Watching!

***If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a “THUMBS UP”, and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)***

admin