Redarc 40-Amp MIDI Fuse Kit Review – etrailer.com



Click for more info and reviews of this Redarc Battery Chargers:
https://www.etrailer.com/Accessories-and-Parts/Redarc/331-fk40.html
Check out some similar Battery Chargers options:
https://www.etrailer.com/dept-pg-Accessories_and_Parts-sf-Battery_Chargers.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-review-redarc-midi-fuse-kit-331-fk40.aspx
Speaker 1: Today we’ll be having a look at the Redarc 40 amp fuse kit for Redarc in-vehicle DC to DC battery chargers, part number 331-FK40.This fuse kit is a great solution when you need to fuse a power wire, such as this six gauge power wire. You may need to use this if you’re using a battery charger on a trailer, which is what we’re going to be using for, or if you’re using it for a wench or if you’re using it for a salt spreader on the back of a plow truck or whatever other application you’re using it with.In our particular case we’re using six gauge wire going into it. The terminals that come with it will crimp onto six gauge wire very nicely. This kit will come with two fuse holders and four fuses so you have two replacement fuses if you ever we’re happen to blow one.We also have four ring terminals so you can actually install both fuse holders appropriately.Now the reason you’re going to want this over other fuse options on the market is that this comes with everything you need in order to properly get a fuse setup on a wire, such as this six gauge wire. The reason you want to have fuse installed is because if you we’re to have a short circuit, you don’t have to worry about an electrical fire happening in your trailer, your vehicle, or damaging your piece of equipment that’s being powered by this. The fuse will blow, thus eliminating the risk of an electric fire or causing damage to your expensive devices.Now the fuses that come with this kit are rated up to 40 amps.

So if you we’re to have a draw over 40 amps, the fuse will then blow and then will protect the system. If you’re running less than 40 amps of current on your device, this will be a perfect solution for you.Inside of our fuse holder, you can find our 40 amp fuse. It’s easily replaceable with one of the included replacements if you we’re to need to replace it. You don’t have to worry about running to an auto parts store in order to get a replacement. You already have it so you’re safe for the future.Now that we’ve gone over some features, we’ll show you how to get it installed.As you can see here, we have a power wire in the engine compartment of our vehicle.

In order to hook this up to our battery, we need to make sure that we have a fuse to protect the circuit that this wire’s going to power.Now we’re going to cut off some insulation from all three ends of our wire. Just using a utility knife to this. If you have wire strippers that are big enough to this, that’s good. I don’t so I’m just using a utility knife.Now that we have a cut, we’ll pull off the end and we’ll twist the wire together nice and tight. We’ll do the same for the other two ends.Now we’ll take one of our ring terminals that comes with our kit, and we’ll stick it on the long end of our cable.

We’ll stick it down all the way and we’ll crimp it into place. We’re using a hydraulic crimper for this. These are readily available at most hardware stores.We did the same for one of the other ends of our short cable. Now on the other end of our short cable, since we’re using six gauge wire, we’re going to attach a six gauge ring terminal with a 3/8 of an inch diameter hole, part number SWC57016 on our website.We’ll use our same crimping tool to crimp that into place.Redarc does highly recommend that we solder .. I will go ahead and get some solder inside of there.Okay, now that our connection is soldered, we’ll have a great electrical connection that’s nice and solid.

We’ll take some heat shrink and we’ll cover up our solder joint and our cable. We’ll use a heat gun to shrink it down.We’ll repeat the same process as soldering and heat shrinking all of our connections from this point forward.Now we’ll take our fuse holder, remove the nuts. Take our provided 40 amp fuse. Place it over the studs and we’ll place our terminals over the studs and reinstall the nuts.Now we use an eight millimeter socket to tighten our nuts. Now we’ll take our cover and we’ll fold it over our connections and it’ll snap closed and lock into place.Now we’ll remove this nut on our positive battery post. Place a ring terminal over the stud and we’ll reinstall the nut.That completes our look at an installation of the Redarc 40 amp fuse kit for Redarc in-vehicle DC to DC battery chargers, part number 331-FK40.

admin

I Highly Recommend The Cascade One Plus Starter Kit by Vaporesso! Cascade One Plus Review



ENTER THE GIVEAWAY: https://goo.gl/qxjW8U I LOVE THIS KIT! The Vaporesso Cascade One Plus Vaping Starter kit is my go to recommendation for any vaper looking for an on the go or starter vaping kit. The sub ohm tank by itself is worth the money they want for the whole kit.

For the Best Ejuice and MTL SaltNic Pod E Liquid go to https://www.hometownhero.com and use code ‘mrhohms’ for 15% off your entire order!

Hometown Hero is an Industry leading ejuice company focused on providing vapers the absolute best e liquid available. Hometown Hero donates 1% of their profits to the DAV (Disabled American Veterans Foundation) and another 1% to the local artists who designed the awesome bottle art. For more information contact: store@hometownhero.com

Connect with Us:
Sherlock- @sherlockhohms everywhere
Hometown Hero- @hometownhero
Twitter: @hometownheroatx

For business inquiries or to have your product reviewed: sherlockhohms@gmail.com

Vape Battery Safety and Resources:
Where I get my batteries, battery wraps, battery chargers, and insulators: https://www.imrbatteries.com/
Battery Mooch (The Battery God):
Facebook: https://www.facebook.com/batterymooch/
Mooch’s Tests, Results, and Recommendations: https://www.e-cigarette-forum.com/…/list-of-battery-tests.…/…
Mooch Youtube Channel: https://www.youtube.com/channel/UCePHh3NMvu3rW2LFJeOWo-Q

Hashtag activism isn’t cutting it anymore. It is up to every single one of us to fight for ourselves. It’s time to step up and get active. If you can’t name your senator and congressman right now then you are not doing enough. If we lose the fight against the FDA, the blood of the industry will be on your hands and you lose the right to complain. With very little effort you can make a tangible difference. Seriously, get off your ass and make a call, write a letter or email, fight for the industry that saved your life. To find out more, visit casaa.org , notblowingsmoke.org , august8th.org or any other advocacy organization.

We have not been paid to promote anything, nothing is sponsored. What you see is what your get. We will be the exclusive source of honest reviews, bringing you our honest and unbiased opinions so you can make better informed decisions before spending your hard earned money! Want to see something reviewed? Let us know!

admin

Homemade AA Battery Charger Ran Off The Harbor Freight Solar Panel Kit



This is very simple to make all you need is the plug and the battery box

Like us on Facebook:https://www.facebook.com/pages/2012solarful/782364815154927?ref=aymt_homepage_panel

admin

Digiflavor EDGE Kit Wireless Charging?



Digiflavor EDGE Kit Wireless Charging?
Today I review the Digiflavor Spectre Mesh Tank and the EDGE Mod, but I also test the charging feature and give you a chance to score.

To enter Contests, Subscribe to the newsletter here: https://mailchi.mp/djlsbvapes/subscribe

Become a member of the channel here: https://www.youtube.com/channel/UCo4AFXAUeus3oMgp4JZEjxA/join

FOR MORE INFO AND LINKS, CHECK THE POST ON MY WEBSITE.

THIS IS MY FAIR AND UNBIASED REVIEW OF THIS PRODUCT.
WHAT YOU SEE IN THIS VIDEO ARE BOTH MY PERSONAL OPINIONS AND FACTS ACQUIRED AND PRESENTED MAKING USE OF SCIENTIFIC AND TECHNICAL EQUIPMENT.
THE CONTENT ON THIS CHANNEL IS MEANT TO BE SEEN AS EDUCATIONAL.
MUST BE 21+ YEARS TO VIEW THESE MATERIALS
VAPING BEING CONSIDERED A CONTROLLED SUBSTANCE, THE VERY FEW CONTESTS WHERE CONDUCTED WITH PROOF OF AGE, AND CONDUCTED ON ANOTHER PLATFORM AS YOUTUBE DOES NOT ALLOW THEM TO BE PERFORMED ON CONTROLLED SUBSTANCES.
FOR MORE INFO, CHECK THE POST ON MY WEBSITE.

🙏Want to support the channel?: Patreon Page🙏https://www.patreon.com/djlsbvapes

👌My Favorite Cotton👌

❤️Wanna Translate my videos?❤️http://www.youtube.com/timedtext_cs_panel?c=UCo4AFXAUeus3oMgp4JZEjxA&tab=2

Learn about Temperature Control here: https://youtu.be/rx2ZbNR-hHA

Check out my Other Channel: http://www.youtube.com/c/djlsb/

510 connectors length database: http://bit.ly/1U4woi4

You can also check me at:

Home


https://instagram.com/djlsbvapes/
https://www.facebook.com/DJLsbVapes/
http://google.com/+DJLsbVapes/
https://twitter.com/DJLsbVapes/

Want to get the word out about your products?
Inquire me at: djlsb@djlsbvapes.com

Other reviewers I watch and you should check out too:
Busardo: https://www.youtube.com/user/pbusardo
GrimmGreen: https://www.youtube.com/user/GrimmGreen
Vaping Bogan: https://www.youtube.com/channel/UCExqR7C-PZp9aTEF-hUIRsA
Heathen: https://www.youtube.com/channel/UCkHN22f6L6cIC4qhVuWNhwQ
Mike Vapes: https://www.youtube.com/channel/UCt3WcCLs8Zm-zZNcqgixyMw
RiP Trippers: https://www.youtube.com/user/RiPTrippers
Vaping Biker: https://www.youtube.com/user/doormandean123
JB Digit (PT Reviews): https://www.youtube.com/user/jbdigit

NOTE: To Watch in 4K at 60fps you have to use google chrome or a compatible smart tv.

Musics from Epidemic Sound (http://www.epidemicsound.com)

Musics from Epidemic Sound (http://www.epidemicsound.com)

#vaping #ecig #vapes

admin

EDGE 200W KIT by Digiflavor – Wireless Charging!



In this video we check out the Edge Kit by Digiflavor. This is a kit that comes with the Edge mod and the Spectre mesh tank. I also show the wireless charger that you can purchase for the mod.

Facebook
https://www.facebook.com/smmvapereviews
Instagram
https://www.instagram.com/suckmymod/
Twitter

Check out our new Youtube channel!
https://www.youtube.com/c/mattandv

Once again don’t forget to join http://casaa.org

These videos are my opinions based on the experiences I have had with the product. Most of the products I have received at no charge for the purpose of review. I retain the right to say whatever I want about the products, and I have always been 100% honest in my videos.

admin

BESTON 2-Pack LP-E6 LP-E6N Battery Pack and USB Dual Charger Kit for Canon EOS 6D 7D 80…



Get it Here – https://amzn.to/2rB1oNE

This fits your . Make sure this fits by entering your model number. Powerful and Safe: Batteries are ETL certified, each 1900mah battery offers up to 600 shots, built-in 5 layers of protection IC (over-charging, over-discharging, short-circuit, high-temperature and surge protection) Multi Charging Ways: Common micro-USB input makes the charger possible to be powered up by any USB 5V output, like wall chargers, power banks, car chargers, laptops etc Quick Charge: Charger input 5V / 2A, output 8.4V / 1x 800mA or 2x 550mA, takes only 4 hours to fully recharge 2 batteries simultaneously, and each charging slot works independently Fully Decoded: Work with Canon cameras that use LP E6 or E6N battery: EOS 6D / 7D / 80D / 70D / 60D / 60Da / 5D Mark IV / 5D Mark III / 5D Mark II / 5DS / 5DS R / 6D Mark II / 7D Mark II and more Package Includes: 2 rechargeable li-ion LPE6 / LPE6N batteries, a USB dual charger  and a 70cm long micro-USB cable

Get it Here – https://amzn.to/2rB1oNE

admin

Unboxing Kingma Battery Charger Kit with Sony A7rii



BATTERY&CHARGER : KINGMA
MODEL : KM-FW50
BATTERY VOLTAGE : 7.4V
BATTERY CAPACITY : 1080mAH
VAILABLE BRAND : SONY A7M2,A7R2,A7,7R,A7R,7S,A7S,A6000,A5000,A5100,A6300..

admin

Do we need wireless charging? Digiflavor EDGE kit



Ok I may have gotten a little out of hand in this video with the red lights… I can admit that now. No matter… wanted to spend some time with the Digiflavor EDGE it. The kit itself is fine. It will vape for ya. The tank delivers a real nice vape and the dual 18650 mod offers plenty of power as well as temperature control features.

The digiflavor charger ( available as a separate purchase ) didn’t seem to be working to well for me. After LOTS of fiddling I did get the EDGE mod to charge on it’s own, by stacking memory cards underneath it in order to achieve the correct charging position.

Seeing as how this is the ONLY wireless charger I have, I can’t say for sure if the edge will charge on other companies wireless chargers. Oh the Digiflavor charger also charged my phone kinda.

No links allowed, use your google-foo

Digiflavor Edge Kit – M.Terk Terkish Harvest liquid

▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇

IF YOU CARE ABOUT VAPING UTILIZE THE FOLLOWING LINKS AND MAKE A DIFFERENCE.

►http://august8th.org
►http://casaa.org/
►http://notblowingsmoke.org/
►http://fdaregs.info/
►http://www.r2bsmokefree.org

((Other links))

Subscribe ► http://bit.ly/GrimmTube
Instagram ►http://instagram.com/grimmgreen/
Facebook ► https://www.facebook.com/GrimmGreen
Twitter ► https://twitter.com/GrimmGreen
Patreon►https://www.patreon.com/GrimmGreen

All my videos are my opinions based on the experiences I have had with the product. Most of the products I have received at no charge for the purpose of review. I retain the right to say whatever I want about the products I receive and would obviously never accept money in exchange for a positive review. My integrity is never for sale.

admin

Dual USB Portable Jump Starter Kit Emergency Battery Charger Power Kit DIY Supplies Car Jump Starter



More at: http://ali.pub/2wupf9

Dual USB Portable Jump Starter Kit Emergency Battery Charger Power Kit DIY Supplies Car Jump Starter Kit
Dual,USB,Portable,Jump,Starter,Kit,Emergency,Battery,Charger,Power,Kit,DIY,Supplies,Car,Jump,Starter,Kit

admin

Hopkins Trailer Breakaway Kit Battery Charger Installation



https://www.etrailer.com, Subscribe: https://www.youtube.com/user/etrailertv

CHARGER for Breakaway kit by Hopkins (Accessories and Parts)
https://www.etrailer.com/Accessories-and-Parts/Hopkins/20011.html

https://www.etrailer.com is the world’s leading online retailer of custom-fit towing accessories. We carry thousands of vehicle accessories such as custom-fit trailer hitches for over 3,100 different vehicles, performance chips, heavy-duty towing supplies, trailer parts, bike racks, cargo carriers, step bars, tonneau covers, lights, car covers, RV supplies, floor mats, and much more, to help you make your vehicle more useful and more fun. Our decades of experience and enormous buying power ensure that you will get quality parts, and excellent service, at the lowest price possible. All this is backed by our Satisfaction Guarantee(https://www.etrailer.com/customer-service-ordering.aspx#returns) and our Lowest Price Pledge(https://www.etrailer.com/customer-service-ordering.aspx#pricepledge).

Full transcript: https://www.etrailer.com/tv-install-hopkins-trailer-breakaway-kit-battery-charger-20011.aspx
Today on this enclosed trailer were going to install part number 20011 from Hopkins. This is their trailer breakaway kit battery charger. Right now, looking at our trailer the way its hooked up is that it does not have a battery charger. It has a 12 volt power lead coming off the towing vehicle going straight to the battery that will charge the battery, but over time that could overcharge the battery, especially on a long trip. Were going to install our battery charger. The first step is we will go ahead and locate the wiring that comes off the battery charge from the towing vehicle and we will hook that up to the black wire.

Next we will go ahead and take the red wire and we will hook that up to the battery on the trailer, that way the battery will be getting a charge. Now the blue wire coming off the charger will go out to our breakaway switch. You can use a variety of different connections. In this case we will be using wire nuts. Once our connections are made we can take our charger and tuck it in next to the battery.

With that, that will finish it for our install of part number 20011 from Hopkins on this enclosed trailer.

admin