SOLAR PRO-LOGIX PL5100 12/24 Volt Battery Charger + Power Supply

The new PL5100, 12/24V Fleet Charger, is specifically designed to meet the challenges of servicing the multi-battery packs found in today’s Over-the-Road vehicles, implements and agricultural equipment. With a maximum charging rate of 100 amps, it is able to bring even heavily discharged multi-battery packs back to full charge quickly and safely. On today’s tractor-trailers, it is not unusual to encounter battery packs at 80%, 70%, even 60% state of charge. With a 4-battery pack utilizing 150 AHr batteries, 60% state of charge means that a total of 240 amp hours need to be replenished to return the pack to full charge. In this instance, the 100A charging mode reduces your bulk charging time from 3.4 to 2.4 hours, a 30% improvement vs. a 70A charger. During a regularly scheduled service event, this time savings could mean the difference between getting the pack back to full charge or only partially recharging it. Increasingly, electrical system repair and diagnosis requires the supply of steady power to maintain system voltage throughout the repair event. The PL5100 features a power supply mode that allows the operator to select a target voltage level for the vehicle’s system and the charger will supply current as needed to hold system voltage at the target level. This mode is supported for both 12V and 24V operation and allows the operator to select the desired voltage in 0.1V increments (13.3-14.9V, 100A in 12V mode; 27.2-29.9V, 30A in 24V mode).


PRO-LOGIX PL2320 6/12V Battery Charger

Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2320 is the perfect charger to meet the needs of today’s and tomorrow’s professional technician. Intelligent, beneficial, safe and versatile – one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging.

Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2320.

6 and 12 Volt battery charging
20/10/2A charge rates
20A fast charge rate is ideal for charging large batteries
Fully automatic operation
Advanced multi-phase charging process
Properly charges all battery types
Soft Start Mode for severely depleted batteries
Recondition Mode rejuvenates distressed batteries
Enhanced maintenance mode for ideal long term storage
Temperature compensation for more effective charging
Reverse Polarity Protection and Battery Fault Detection
Data rich display provides detailed feedback during charging


SOLAR PRO-LOGIX PL4020 12V Multi-Bank 2A Smart Battery Charging Station

Jason gives us an in-depth look at the PL4020 Charging Station by PRO-LOGIX.

Model PL4020 is a perfect charger to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. It features four independent output channels designed to properly charge a flooded or AGM (including Sprial Wound) battery. Because each output is independent of the others, a troublesome battery on one channel does not create problems for the other channels. It combines fully automatic operation with the ability to properly charge multiple battery types. Advanced charging logic, robust components, quick set-up and smart display feedback mean effective and efficient charging for your operation.


review of Solar Prologix PL2320, 6v/12v battery charger/maintainer

Link to product website

Here is where you can buy one

This is my review of the Solar Pro Logix PL2320 6v/12v automatic battery charger and maintainer.


PRO-LOGIX Portable Chargers Control Panel Charging Setup

How to use the Control Panel for Charging a Battery using a PRO-LOGIX portable battery charger. For model# PL2310, PL2320