ChargePoint Express 250: Bolt EV 150 A DCFC Session



I was finally able to log a 150 A session on the ChargePoint Express 250 station at ChargePoint Headquarters. The session went mostly as expected; however, the first step down from 150 A didn’t occur until 54% battery. Also, because this charger is limited to 150 A (the Bolt EV’s maximum charging current), I still wasn’t able to confirm whether the Bolt EV can draw additional power for battery conditioning and climate control when more than 150 A is available from the charger.

https://www.plugshare.com/location/68932

admin

Inside the fragile mind of an FPV addict…



Flying the Rooster again, just messing about with editing and trying to learn some skills (clearly I have none!)

#fpvlife #quaddiction #onemorepack #onepack #fpv

Thank you for checking out my content, please like, subscribe and comment – I love all that stuff!

Please Follow me 🙂
Twitter: https://www.twitter.com/underfluked
Website: https://www.underfluked.com

Thanks!

Kwads
Rooster 1
frame: Armattan Rooster 5″ freestyle frame
motors: T-Motor F40 Pro II 2400kv
FC: Matek 405
ESC: Spedix 30a
receiver: FRSKy R-XSR
vtx: Tramp HV EU Version (set to 25mw), Lumenier AXII antenna
camera: Runcam Split 2
3d printed: ESC protectors, arm protectors, VTX/Receiver holder, AXII aerial mount, battery skid (upside down to protect battery)
Notes: Standard goPro mount, used to fix Nikon Keymission 360 camera (VR/360) or GoPro Hero 5 Session

Rooster 2
frame: Armattan Rooster 5″ freestyle frame
motors: Steele Silk V2s 2345kv
FC: Matek 405
ESC: Spedix 30a
receiver: FRSKy R-XSR
vtx: Tramp HV EU Version (set to 25mw), Lumenier AXII antenna
camera: Runcam Swift 2-RR Rotor Riot Edition and GoPro Hero 5 Session
3d printed: VTX/Receiver holder, AXII aerial mount, battery skid (upside down to protect battery), camera mount

Halo Nemesis
frame: Halo Nemesis 5″ race frame
motors: Eachine X220s motors – very cheap, really quiet and amazing value
FC: AIO Hobbywing 20mm
ESC: AIO/4in1 Hobbywing 20mm (came with FC as a set)
receiver :FRSKy XSR
vtx: Tramp HV EU Version (set to 25mw), Luminier ‘horned’ antenna
camera: Runcam Swift mini
3d printed: battery skid, canopy (not fitted yet!)

Ummagawd Remix
frame: Ummagawd Remix 5″ Freestyle frame
motors: Ummagawd Hypetrain motors V1.1 2306 2150kv
FC: AIO Hobbywing FC
ESC: AIO/4in1 Hobbywing ESC (Came with FC as a set)
receiver: FRSKy XSR
vtx: Tramp HV EU Version (set to 25mw), Luminier AXII antenna
camera: Runcam Swift 2-RR Rotor Riot Edition and GoPro Hero 5 Session
3d printed: GoPro Session mount

Diatone M3
Stock, no modifications – super lovely 3″ kwad
batteries: VIFLY 4s 550mah

Diatone GT-R90
Stock, no modifications – amazing 2″ kwad
batteries: VIFLY 4s 550mah

Emax Hawk 5
Stock, no modifications – amazing 5″ kwad

Eachine E010s (Whoop clone)
With upgrades…
FC: Beecore 2.0
Fresh red elastic band
Props cut to dual blade

Batteries:
Tattu 4s 1550mah with removable balance lead
Acehe 4s 1500mah with balance lead extension
VIFLY 4s 550mah
Tattu 1s 220mah

Radio:
FRSKy X10s

FPV gear:
Fatshark Attitude V4 (the red ones!)
TrueD Diversity module with stock Fatshark ImmersionRC omni antenna and..
Menace Pico directional patch previously used Menace Invader directional patch (still very good!)
Backup goggles – Eachine 800v
G Teng FPV watch – great for testing without needing to wear goggles, perfect on the bench

Chargers:
imax B6AC v2 – have 2 of these, my go-to bench charger, use with parallel charge boards
iSDT Smart Charger Q6 Pro 300w/14a – My go-to field charger
xtar VC4 81650 battery charger (for my Fatshark battery pack)

Cameras:
GoPro Hero 3
GoPro Hero 5 Session
Nikon Keymission 360
Gorilla tripod
Converted microphone boom stand
Feiyutech 3 axis Gopro gimbal

Camera drones:
DJI Mavic Pro x2
Parrot Disco

Race gates and obstacles:
Graupner race flags
Graupner mini race gates
Graupner freestyle cube
Tiny Whoop race gate rings
Gemfan race gates
Forza soccer goal posts (netting removed)

admin

FPV quad race practice session, looking for lines on a bigger track.



Some race practice with the Emax Hawk 5. Trying to focus on lines, hitting gates when they’re lined up, I’m going to try to ease into hitting more as I get better lines – just a different approach to practice. #fpv

Thank you for checking out my content, please like, subscribe and comment – I love all that stuff!

Please Follow me 🙂
Twitter: https://www.twitter.com/underfluked
Website: https://www.underfluked.com

Thanks!

Kwads
Rooster 1
frame: Armattan Rooster 5″ freestyle frame
motors: T-Motor F40 Pro II 2400kv
FC: Matek 405
ESC: Spedix 30a
receiver: FRSKy R-XSR
vtx: Tramp HV EU Version (set to 25mw), Lumenier AXII antenna
camera: Runcam Split 2
3d printed: ESC protectors, arm protectors, VTX/Receiver holder, AXII aerial mount, battery skid (upside down to protect battery)
Notes: Standard goPro mount, used to fix Nikon Keymission 360 camera (VR/360) or GoPro Hero 5 Session

Rooster 2
frame: Armattan Rooster 5″ freestyle frame
motors: Steele Silk V2s 2345kv
FC: Matek 405
ESC: Spedix 30a
receiver: FRSKy R-XSR
vtx: Tramp HV EU Version (set to 25mw), Lumenier AXII antenna
camera: Runcam Swift 2-RR Rotor Riot Edition and GoPro Hero 5 Session
3d printed: VTX/Receiver holder, AXII aerial mount, battery skid (upside down to protect battery), camera mount

Halo Nemesis
frame: Halo Nemesis 5″ race frame
motors: Eachine X220s motors – very cheap, really quiet and amazing value
FC: AIO Hobbywing 20mm
ESC: AIO/4in1 Hobbywing 20mm (came with FC as a set)
receiver :FRSKy XSR
vtx: Tramp HV EU Version (set to 25mw), Luminier ‘horned’ antenna
camera: Runcam Swift mini
3d printed: battery skid, canopy (not fitted yet!)

Ummagawd Remix
frame: Ummagawd Remix 5″ Freestyle frame
motors: Ummagawd Hypetrain motors V1.1 2306 2150kv
FC: AIO Hobbywing FC
ESC: AIO/4in1 Hobbywing ESC (Came with FC as a set)
receiver: FRSKy XSR
vtx: Tramp HV EU Version (set to 25mw), Luminier AXII antenna
camera: Runcam Swift 2-RR Rotor Riot Edition and GoPro Hero 5 Session
3d printed: GoPro Session mount

Diatone M3
Stock, no modifications – super lovely 3″ kwad
batteries: VIFLY 4s 550mah

Diatone GT-R90
Stock, no modifications – amazing 2″ kwad
batteries: VIFLY 4s 550mah

Emax Hawk 5
Stock, no modifications – amazing 5″ kwad

Eachine E010s (Whoop clone)
With upgrades…
FC: Beecore 2.0
Fresh red elastic band
Props cut to dual blade

Batteries:
Tattu 4s 1550mah with removable balance lead
Acehe 4s 1500mah with balance lead extension
VIFLY 4s 550mah
Tattu 1s 220mah

Radio:
FRSKy X10s

FPV gear:
Fatshark Attitude V4 (the red ones!)
TrueD Diversity module with stock Fatshark ImmersionRC omni antenna and..
Menace Pico directional patch previously used Menace Invader directional patch (still very good!)
Backup goggles – Eachine 800v
G Teng FPV watch – great for testing without needing to wear goggles, perfect on the bench

Chargers:
imax B6AC v2 – have 2 of these, my go-to bench charger, use with parallel charge boards
iSDT Smart Charger Q6 Pro 300w/14a – My go-to field charger
xtar VC4 81650 battery charger (for my Fatshark battery pack)

Cameras:
GoPro Hero 3
GoPro Hero 5 Session
Nikon Keymission 360
Gorilla tripod
Converted microphone boom stand
Feiyutech 3 axis Gopro gimbal

Camera drones:
DJI Mavic Pro x2
Parrot Disco

Race gates and obstacles:
Graupner race flags
Graupner mini race gates
Graupner freestyle cube
Tiny Whoop race gate rings
Gemfan race gates
Forza soccer goal posts (netting removed)

admin