iSDT T8 1000W 30A Charger Review & Setup

The iSDT T8 1000W 30A Charger is my top pick when it comes to charging lipo batteries. This quality charger fits in the palm of your hand, has an intuitive interface. Learn how I utilize it to parallel balance charge 1300mah 4S 80C lipo batteries “like a boss” using a charge board.

2019 Update: This charger has been through 400 charge piece cycles and is still alive. I am still using the same power supply. Since this time I have learned that 12v, although it works, is very sub-optimal; if I had to do it again I would get a 24v supply for the T8.


🔋 iSDT T8 1000W 30A Battery Charger:

🔋 iSDT Battery Chargers & Accessories:


🔌 Lipo Connection Solutions 750W PSU:
(Purchase the XT60 upgrade with 10AWG wire.)

🎚️STRIX 4S Parallel Charging Board 2.0 – JB Signature Line:

🔩 Indestructable quads 1300mah 4s battery:


✖ Disclosure: I may earn a small commission for my endorsement, recommendation, testimonial and/or link to any products reviewed. Products may be altered during production after this review. Your purchase helps support my work in bringing you real, unbiased information about RC products. Thank you!


Solar power: Solar charge Controller, Solar charger Battery,solar charge controller setup

Other tutorials:
TOP 10 Arduino projects 2019:

Top 10 Arduino IOT based projects 2019:

IOT based Water level Monitoring:

Make a free payoneer Account and Earn 25 Dollars:

Support me on Patreon and get access to hundreds of projects:

sign up for free account and download hardware designing and programming books:

free Amazon Business Account:

Project Description:

Before I make a solar charge controller, first I decided to use a commercially available solar charge controller. This is the CM3024Z solar charge controller from China which I will be using today. I will check the efficiency and will see for how long it remains functional. In part 2 of the solar charge controller I will show you how you can make your own high amps solar charge controller with wireless battery voltage monitoring and automatic disconnection system. while In this episode you will learn how to connect Solar panels in parallel and how to setup a solar charge controller. Without any further delay let’s get started!!!!

The solar charge controller and solar panels purchase links are given in the description.

What is a solar Charge Controller?
Before I start the connections, first let me explain what is a solar charge controller and why we need it?
A charge controller or charge regulator is basically a voltage or current regulator to keep batteries from over charging. It regulates the voltage and current from the solar panels going to the battery. Most 12 volt panels put out about 16 to 20 volts or even more, so if there is no regulation the batteries will be damaged from overcharging as most batteries need around 14 to 14.5 volts to get fully charged.


Amazon Purchase links:
160 Watts solar panels:

Solar charge controller:

Arduino uno:

Mega 2560:

Super Starter kit for Beginners

Jumper Wires:

Bread Board:

12v Adaptor:

PCB plate:

Variable Supply:

Digital Multimeter:

Vero Board / strip board:

Soldering iron kit: “best” You guys should definitely purchase this

Solder wire:

Wire Stripper:

wire cutter:

PCB small portable drill machine:

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!

Follow me on Facebook:

About the Electronic Clinic:
Electronic Clinic is the only channel on YouTube that covers all the engineering fields. Electronic Clinic helps the students and other professionals to learn electronics designing and programming. Electronic Clinic has tutorials on

Raspberry pi
image processing
gsm based projects
bluetooth based projects
esp8266 projects
nodemcu projects
desktop application designing and programming

arduino uno
arduino project
arduino projects
electronics projects
simple arduino projects
top arduino projects
final year engineering projects
electronics projects ideas
basic arduino projects
arduino iot project
top iot projects
arduino iot project
arduino programming
raspberry pi projects for beginners
raspberry pi tutorials
raspberry pi programming
raspberry pi basics
raspberry pi 3
electronics tutorials
internet of things iot
arduino tutorial for beginners

Project related Tags:
Solar Panels
solar panels charge controller
how to use a charge controller with solar panel
charge controller connections
how to connect solar panels in parallel
solar power
how to use a solar panel
what is a solar charge controller
why solar charge controller is used
need of solar charge controller
diy solar charge controller
best solar charge controller
solar charge controller with display
solar battery charger
solar charge
how to protect battery from damage
solar charge controller for a battery
why we need a solar charge controller for a battery
solar power
how to use solar power
solar power project
engineering projects
electronics projects
projects ideas
power projects ideas
power projects


Two Boat Battery Setup – A Better Battery Switch

Two battery boat setup with wiring diagram. Blue Sea two battery switch & ACR dual charging system. This dual battery setup for boats uses the Blue Sea add a battery kit for charging marine batteries. Charges both boat batteries automatically. It’s superior to the old manually switching system.

Add a battery kit :
Boss stereo :

▬▬▬▬▬▬▬ SUBSCRIBE ▬▬▬▬▬▬▬
New? Subscribe to help us reach 1000 Subscribers!
Subscribe ►

GoPro Hero 5 black:
Go Pro Session 5 ( refurb):
Rode video micro :
Adobe premier elements
Back up drives:
Adobe premier elements bundle
Zoom H1N bundle :
Lav mic TRRS for Iphone with adaptor :
Joby 3K tripod :
My sunpak tripod :
Another good tripod :
Mic for guitar amp:


Castaway Taranis Light rod :
Shimano ci4+ 2500
Shimano Curado:
Curado DC:


Helix 7 :
King pin bow mount –
King pin pole :
3M 5200 –
3m 4200 fast cure –
Atwood 500 livewell pump –
Flowmax scuppers :
Minn Kota 4 bank charger :
Boat stereo- In-dash :


Fender T-bucket
Fender strat ( check from time to time) –
PRS Custom 24 ( check availability)
Boss super chorus –
MXR carbon copy –
Fender Hot rod deluxe III –


Gamakatsu circle hooks –
Ande 15 lb Mono:
Paul brown soft dine :
Super spook :
Sand eel :
Gulp Swimming mullet:
13 inch Hook extractor:
Frabill net :
Large Frabill net :
John Skinner Flounder book:

Cooking, Grilling Stuff:__
Blackstone 17 inch griddle :
Blackstone 36 inch :
Blackstone tailgater :
Blackstone accessories:
Old smokey Grill :

As an Amazon Associate I earn from qualifying purchases.

#TwoBatteryBoatSetup #DualBatteryInstall #BluzGuitarGuyFishing


Battery charging setup

Some thoughts on battery chargers. Not complete by any means, but already too long.

Balance Lead Extensions:

Parallel Charging Boards:
Bardwell 6S Parallel Charging Board 2.0 – JB Signature Line

12V Power Strip (out of stock but…):


Dual Battery Setup with Detailed DIY Install

We show you what we consider the best dual battery system for powering an automotive fridge and accessories. And, we show you in detail how to install it! We also show you how we made and wired our outlet/gauge panel.
While researching second battery systems we learned about Redarc dc-dc chargers. It didn’t take long for us to decide a dc to dc charger was the direction we needed to go in. They make for a super efficient power source.
If you like this video please consider subscribing to our channel and follow us on Facebook and Instagram. There’s plenty more where this one came from! If you think your friends would enjoy this video, feel free to share it on any social media.

The majority of the parts and components we use for the install were obtained from Overland Power Solutions.

Below are links to where we got everything else.

This video will explain in greater detail why you should choose a dc-dc charger;

Here is where we got the ABS plastic we used for the charger base/battery hold-down;

The plastic sheet we used to make the outlet panel;

The switches we installed in our power panel;

Anderson Plug;

Dash mounted indicator light (at time of order ask them to put a green LED in it.);

Rear Cargo Storage Panel;


My awesome FPV lipo field charging setup

This is a rundown of the setup that I use to charge lipo drone batteries in the field when I don’t have access to power. I love it – because it means I can fly longer!

Follow me on Instagram:

I posted this after a number people asked me about my gigantic battery from my “Will it Fly?” video:

16000mAh 4s battery from Hobbyking
Charger from Bangood
Some custom made cables for charging iphone, gopro, fatshark batteries.

FPV drone gear I currently use:
Armattan Rooster frame
Spedix 30A ESCs
Rotor Riot Hypetrain 2306 2450kv motors
Racekraft 5046 props
TBS Unify Pro HV vTx
Betaflight F4 Flight controller
Taranis with M9 gimbals
Pagoda antenna
Fatshark HD V2
Laforge Diversity setup
Mad mushroom / X-air 5.8 dual crosshair directional
Adrenaline 4s 100c 1300mAh batteries
Filmed with a Gopro Session 5
Thinktank FPV Session drone backpack and Taranis case


Construction Trailer Electrical Setup and Tour (110v and 12v)

In this video I take you on a quick tour/overview of my onboard electrical system.
I show how I wired and use my household current with outlets located at the rear and front of my trailer. I also go over the 12v system I have in place. The 12v system powers all the interior lights and my exterior lights when the switch is in the on position. The exterior lights become reverse lights when the truck is in reverse and are powered by the truck.

Product links
12v switch

Reverse Lights

Interior lights

Infrared PIR Motion Sensor Switch (Currently Unavailable but you can check the specs)

Battery Indicator Gauge!28792!US!-1:rk:1:pf:0

Battery Charger (exact model may be unavailable)

Exterior/reverse Lights (Auxbeam)



Complete Setup tutorial, mods, and upgrades for your Eachine Trashcan by Justin Davis. Video includes thorough Betaflight setup, xt30 mod, smart audio tips, antenna upgrade, and how it flies after the upgrades. Share with a friend who needs setup help.

Buy the Eachine Trashcan
Link here :

Best Trashcan 6in1 Battery Charger
Link here :

Eachine Trashcan Frame :
Eachine Trashcan Motors :
Eachine Trashcan Props :
Eachine Trashcan 200mw Vtx :
Eachine Trashcan Case that fits an X7 Radio:
Eachine Trashcan Spare Canopy :
Eachine Trashcan 1S Battery – 10 pack :

Links to the best of 2019 drones below :

Buy a Happymodel MOBULA7 75mm Fpv Race Drone
Buy at Banggood :
Buy at Gearbest :

#2 ———
Buy a Emax Tinyhawk
Ready to fly version with Tinyhawk, Case, Battery, Charger,
Props, and Radio. Link here :
Tinyhawk Bind and fly versions below
Buy at Banggood :
Buy at Geabest :
Recommended (Mobula7 compatible) GNB 1S 260mah batteries
Link here :

#3 ———
Buy an Emax Babyhawk R Pro below :
Gearbest :
Banggood :
Recommended 3S 650mah Tattu Batteries :

#4 ———
Buy a Diatone R239NX Fpv Race Quad
Buy from Diatone HK Website directly here :
Buy a Diatone R239NX with Runcam TX200 (white) here :
Buy a Diatone R239NX with Runcam TX200 (black) here :
Buy a Diatone R239NX with Runcam TX200 (transparent) here :
Buy a Diatone R239NX with TBS Unify here :
Extra R239NX Prop guard Frame $5 here :
Extra R239NX Carbon Frame here :
Buy a Diatone R239NX with Runcam Split 2 here :
Gearbest Coupon Code : IBXPXH192H

#5 ———
LDARC GT7 Fpv Race Quad :
Gearbest :
Banggood :
Suggested GNB 2S 450mah Batteries :

My Newest RC Drone Coupons
are here :

DJI Mavic 2 Drone Specials :
DJI Mavic Air Drone Specials :
DJI Phantom 4 Pro V2 Specials :

Support me on Patreon
GET Entered to WIN SWAG’FEST Giveaways!
Link here :

BECOME A MEMBER – Access to LIVE Video Streams

– Build videos
– Bench time
– Tutorials
– Fpv Road Trips
– Member chat
– Flying Sessions
– Video Vault
– Chat Badges
– Drone Camps Chat Emojis

It’s like hanging out in realtime! Members are saying it is awesome to hang out and talk with Justin Davis in person. Members get automatic notifications for live streams.

▼ – JOIN and become a MEMBER HERE :…

▼ – OFFICIAL Drone Camps Merch Store :
T-Shirts, Long Sleeve, Zip Hoodies, and more
Store here :

▼ – What I currently use. TOP ITEMS LIST :
Radio of choice : Frsky TARANIS X7 below.
Black :
White :
New Blue Taranis X7S version here :
Carbon fiber X7S :
My favorite race quad battery.
Tattu 4S 1300mah Lipo Battery
Link here :
My favorite micro brushless quad :
Link here :
Economy priced 4S 1300mah battery here :
My current favorite 5″ race quad :
EMAX HAWK 5 Link here :
My drone landing pad here :
My favorite Fpv Goggles are the Fatshark HD3
Link here :
Economy $50 pair of googles that have two
diversity antennas. Great for the price.
Link here:
Latest up to date RC and FPV Specials :
Link here :

Disclosure : Any video produced on this channel may have
an affiliate link in the description. Meaning I may make a
monetary compensation. Gotta eat! 🙂 – Thanks for watching!

▼ – Business Inquires:
To get your product reviewed please email:
drone camps @ gmail. com

▼ – BE MY FRIEND on Social Media
Website :
Facebook :



Our Ultimate Off-Grid Free Camping power setup in the Caravan. We install a 300amp hour kit from Enerdrive and show you all about it in the next few vids.

We bought our system here:


Charger and Battery Setup for Preppers

ThruNite MCC-4S Universal Charger
Zebralight H53w AA
Klarus Mini One 130 Lumens
NITECORE 14500 Built-in Micro-USB Rechargeable

Buy my book in Amazon “The Modern Survival Manual”

“Bugging Out and Relocating”

Visit My Website: